ANELGO GLOBAL LOGISTICS
Shipping guides / Guides · Bill of lading checklist

Bill of Lading Checklist: Parties, Freight Terms, Clean Bill & Originals

Guides · Bill of lading checklist · Reviewed November 18, 2026 · 10 minute read

Shipping documents and a bill of lading on a desk in a port office, with stacked containers outside in soft light
Illustrative AI-generated image.

Check the bill of lading against the booking instructions, the invoice and the packing list before the vessel sails: confirm the shipper, consignee and notify party, the freight prepaid or collect term, a clean bill, and the number of originals issued. This checklist walks through thirty checks in four stages.

How to use this checklist

This page covers the bill of lading itself, field by field: the parties and references, the cargo facts, the freight term, the clean bill and the originals, and the final checks before the draft is approved. It does not repeat the ocean freight booking checklist on this site, which covers the booking and the carrier handover before the bill is drafted. It does not repeat the international shipping documents checklist, which covers every document for a shipment. It is the companion to the short guide on reviewing an ocean bill of lading draft; this page is the tick-off tool that walks through every field in order.

Work through the four stages in order, with the booking instructions, the final invoice and the final packing list open beside the draft. Check the draft against those three sources, not against memory, and get every correction in writing from the party that issues the document. Where the draft and the invoice disagree, the invoice is the source to trust for cargo facts, and the booking instructions are the source to trust for the parties and the freight term.

A bill of lading is read by more parties than the one that issues it: the carrier, the destination agent, the broker, the bank and the consignee all read the same document, and each one reads a different field. A wrong consignee, a wrong freight term or a clause on the face of the bill is found by one of them, and the correction then costs more than a revised draft. Where the cargo includes batteries, liquids, aerosols or anything regulated, say so before the draft is issued.

Stage 1 — Parties and references

Stage 1 checks the parties named on the bill: the shipper, the consignee and the notify party, and the references that tie the bill to the booking and the sale. A bill with the right cargo facts and the wrong consignee is still a wrong bill.

Check every name and address letter by letter against the booking instructions, and check the references against the booking and the purchase order. Where the consignee or the notify party is a company, use the full legal name and the full address as agreed, not a short form or a trading name.

Stage 2 — Cargo facts and description

Stage 2 checks the cargo facts: the packages, the marks, the weight, the volume and the description of the goods. These fields are read by the carrier, the terminal and customs, and they must match the final packing list and the final invoice exactly. A description that is vague, or a package count that does not match the packing list, is the most common reason a draft comes back for correction.

Compare the draft with the final packing list line by line, and compare the description with the invoice. Where the cargo is packed in cartons on pallets, check the count shown — cartons, pallets or both — against the packing list.

Stage 3 — Freight term, clean bill and originals

Stage 3 checks the money and the form of the bill: whether the freight is prepaid or collect, whether the bill is clean, how many originals are issued, and which release method the bill uses. These fields decide who pays, whether the bank will accept the bill, and how the cargo is released at destination.

Confirm the freight term against the sales contract and the booking instructions, and confirm the release method against the contract and the payment arrangement. Where the sales contract calls for a clean bill, a clause on the face of the bill must be challenged before approval.

Stage 4 — Final checks before approval

Stage 4 is the last pass before the draft is approved: the whole bill read again against the invoice, the packing list and the booking instructions, the corrections sent in writing, and the approved copy kept. A draft approved in a hurry is the one that comes back as a correction after issue.

Send corrections as a clear list to the party that issues the document, and ask for a revised draft. Approve only the revised draft, in writing, and keep a dated copy of the approved version. Where the draft changes after approval, ask for the new version and check it again.

Which freight term and release method fits the shipment?

The freight term and the release method follow the sales contract and the payment arrangement, not the habit. A letter of credit calls for one combination; a shipment between trusted parties calls for another. Whatever the combination, every field on the bill must match the contract, or the bill will be challenged by the party that reads it.

CombinationWhen it fitsWhat to check before choosing
Freight prepaid, originals issuedSales contract calls for prepaid freight and a negotiable bill, often with a letter of creditPrepaid term and the number of originals matched to the contract and the bank instructions
Freight collect, originals issuedBuyer pays the freight at destination under the contract, and a negotiable bill is still requiredCollect term matched to the contract, and the payer at destination confirmed
Sea waybill, no originalsParties do not need paper originals to transfer or control the cargo, and the contract allows itWaybill release confirmed with the carrier, and the consignee named on the waybill checked
Express releaseSeller and buyer agree the cargo is released without originals, and the carrier confirms the processExpress release confirmed in writing with the issuing party, and the release confirmation kept

Common reasons a bill of lading needs correction after issue

Most corrections share the same few errors. The consignee was copied from an old shipment, so the cargo was released to the wrong party or held while the correction was made. The freight term was left as the carrier default, so the payer on the bill was not the payer the contract names. The description was written from the booking instead of the final packing list, so the package count or the weight did not match. A clause was left on the face of the bill, so the bank refused it under the letter of credit.

The fix is the same in each case: check the draft against the three sources — the booking instructions, the final invoice and the final packing list — before approval, and send every correction in writing to the issuing party. The cheapest correction is a revised draft; the most expensive one is an amendment after issue, which needs fees, supporting documents or approvals. Check the revised draft in full, and keep a dated copy of the approved version.

What this checklist cannot decide

This checklist cannot decide the freight rate, the sailing schedule or the space on the vessel: those follow the booking, the carrier and the space the carrier confirms. It cannot decide the classification or the valuation of the goods: those follow the cargo, the documents and the rules customs applies. It cannot decide whether goods should move by sea or by air: that follows the cargo, the schedule and the budget.

It also cannot replace legal or tax advice on a specific bill, entry or letter of credit. Where the shipment is large, the cargo is regulated, or a bill has been refused by the bank, ask the carrier, the forwarder, the broker or a licensed adviser before the next step, and keep the answer in the file. It cannot clear goods that customs has not released. It cannot change the release method after the bill is issued without the agreement of the issuing party.

Bill of lading guides on this site

Related guides

Official references

Note: This guide provides general logistics planning information. It is not legal, customs, tax, safety or carrier acceptance advice. Requirements, services and schedules depend on the actual goods, route, contract, provider and current rules. Verify shipment-specific questions with the responsible carrier, customs broker or authority before dispatch.

For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.

Request a shipment review ↗

Frequently asked questions

What should I check first on a bill of lading draft?

Check the parties first — the shipper, the consignee and the notify party — then the cargo facts against the final packing list, then the freight prepaid or collect term against the sales contract. A wrong consignee or a wrong freight term is harder to correct after issue than a wrong package count, so the parties and the freight term come before the smaller fields. Check every field against one of those three sources.

What is the difference between freight prepaid and freight collect on a bill of lading?

Freight prepaid means the freight is paid at the port of loading by the party the contract names, and the bill is marked prepaid. Freight collect means the freight is paid at the port of discharge by the party the contract names, and the bill is marked collect. The term must match the sales contract and the Incoterm: a bill marked prepaid when the contract calls for collect, or the reverse, will be challenged by the payer. Confirm the term in writing with the issuing party before the draft is approved.

How many original bills of lading are issued, and why does the number matter?

The number of originals is set by the booking instructions and the bank requirements where a letter of credit applies, and it is shown on the bill itself. Originals are the documents the cargo is released against, so the number matters: too few originals can hold the release, and originals sent to the wrong party can put the cargo in the wrong hands. Confirm the number before approval, and keep a record of where each original was sent.

← More shipping guides