Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover

An ocean freight booking is confirmed in stages: the cargo is ready and described, the service is chosen, the booking is placed and confirmed, and the container is loaded, sealed and handed over with a bill of lading. This checklist walks through those four stages in order.
How to use this checklist
This page is a working tool, not a summary. Tick each item only when the named check has been done and the result is in front of you. A tick means the item was verified, not that the booking is confirmed: the carrier and the terminal each run their own checks, and only they decide whether the container is accepted for loading.
This checklist covers the booking and handover only: getting the cargo ready, choosing the service, placing the booking, and handing the container over with a bill of lading. It does not cover the sea-freight services and routes themselves: the sea-freight guide on this site covers those, and it is linked below. It also does not cover the export documents in detail: the shipping documents checklist on this site covers the export, transport and customs file, and it is linked below.
Work through the four stages in order. Stage 1 settles what is shipping and when it is ready, Stage 2 the service and the container, Stage 3 the booking details and the documents, and Stage 4 the loading, the seal and the bill of lading. If an item in an early stage cannot be ticked, stop there: a booking placed from the wrong cargo details has to be amended, and a container loaded from the wrong plan has to be reworked, and both cost more after the goods have left the warehouse.
Stage 1 — Before you request a booking
Nothing else in this checklist works until the cargo is ready and described. The booking request states the cargo, the weight, the packed dimensions, the origin and destination ports, and the ready date, and the carrier quotes and confirms from those details. Confirm the product, the packing and the quantity before requesting the booking: the HS code must be right for the goods, the dangerous-goods status must be known, and the Incoterms rule must be agreed with the buyer or the seller, because each of these decides how the booking is handled.
Check the cargo details against the goods on hand, not against the sales order alone. Count the cartons, weigh a sample carton, and measure the packed dimensions, because the carrier loads from the declared figures and a mismatch at the terminal means the booking is reworked. Check the ready date with the supplier and the port cut-off with the carrier, so the booking is requested with time for the container to reach the port and clear the cut-off.
Stage 2 — Choosing FCL, LCL or consolidated
The service follows the cargo volume and the shipment size. A full container load fills a container with one shipper's cargo, a less-than-container load shares a container with other shippers' cargo, and a consolidated shipment groups several orders from one origin into one container. Calculate the total volume in cubic metres before choosing: the volume, the carton count and the weight decide which service fits, and the choice is made from the measured figures, not from a guess.
Check the container size where a full container load is chosen, and the consolidation plan where cargo is grouped. A container that is too small leaves cargo behind, and a container that is too large wastes space the shipper still pays for. Check the sailing and the service route with the carrier, and confirm whether the service is direct or transhipped, because the route decides the port of discharge and the handover at the destination.
Stage 3 — Booking details & documents
The booking is placed with the carrier or the forwarder, and the booking confirmation is the document the rest of the checklist follows. Read the confirmation line by line when it arrives: the vessel and voyage, the port of loading and the port of discharge, the container type and quantity, the cut-off times for the shipping instruction and the verified gross mass, and the cargo cut-off for the container to reach the terminal. A detail that is wrong on the confirmation is wrong on the bill of lading unless it is corrected.
Prepare the documents the carrier asks for before the cut-offs. The shipping instruction states the shipper, the consignee and the notify party, the cargo description and the marks, and the freight terms. The packing list states the cartons, the weight and the volume, and the commercial invoice states the goods, the value and the payment terms. The verified gross mass is weighed and declared for each container, and each document is checked against the booking confirmation so the names, the numbers and the cargo description match.
Stage 4 — Handover, loading & bill of lading
The container is inspected before loading: the doors close and seal, the interior is clean and dry, and there is no damage that could let water in. Load to the loading plan, with the weight spread across the container floor and the cartons secured so nothing moves at sea, and keep a photo record of the loaded container before the doors are closed. The seal number is recorded when the doors are closed, and the seal is checked against the number on the bill of lading.
Check the bill of lading draft against the booking confirmation and the shipping instruction before it is released: the shipper, the consignee and the notify party, the ports, the container and seal numbers, the cargo description, the weight and the volume. A draft error corrected before release is a correction; the same error on the released bill of lading is an amendment the carrier must approve. Track the vessel after handover, and watch for the arrival notice from the destination agent so the consignee can prepare the import file.
Full container, shared container or consolidated?
Use this table to choose how the cargo travels. Read the row that matches the measured volume and the order count, then check the fourth column before requesting the booking. A shipment that fills a container is not the same as a shipment that shares one: the loading plan, the seal and the bill of lading follow the service chosen, so the choice is made before the booking is placed, not after.
| Service | What it is | Use it where | What to check before booking |
|---|---|---|---|
| Full container load (FCL) | One shipper's cargo fills a whole container, sealed under one seal and one bill of lading | The measured volume fills a container | Container size, the loading plan, and the weight spread across the container floor |
| Less-than-container load (LCL) | Cargo shares a container with other shippers' cargo, consolidated at a warehouse | The volume is a small part of a container | Volume in cubic metres, the marks on each carton, and the consolidation warehouse |
| Consolidated shipment | Several orders from one origin are grouped into one container | Several orders ship together from one origin | Each order listed separately, with its own marks and packing list |
Common reasons ocean bookings are rolled or held
Most rolled bookings come back to the same few errors. The container reaches the terminal after the cargo cut-off, so the carrier cannot load it on the booked sailing. The verified gross mass is missing or does not match the container, so the terminal cannot accept the container for loading. The shipping instruction arrives after its cut-off, so the bill of lading cannot be issued for the booked sailing. Or the documents describe cargo that does not match the container, so the carrier holds the release until the description is corrected.
The fix is the same in each case: correct the booking with the carrier, submit the corrected document before the next cut-off, and rebook the container on the next available sailing where the carrier offers one. Do not send the container to the terminal after the cut-off and expect it to be loaded, and do not change the cargo description after the bill of lading is released without the carrier's approval: a container that does not match its booking is a container that waits at the terminal.
What this checklist cannot decide
This checklist covers the booking and handover checks for an ocean freight shipment. It does not replace the carrier's booking terms, which state the cut-offs, the charges and the acceptance rules for the sailing in front of you. It also does not replace the destination customs rules or the import file, which the broker and the destination agent must confirm for the shipment in front of you.
The checklist also does not decide the sailing, the service route, or the freight rate. The sailing follows the carrier's schedule, the route follows the service the carrier offers, and the rate follows the booking the carrier confirms. Where any of these is unclear, ask the carrier or the forwarder before the booking is placed, and do not copy the entry from a similar shipment.
Ocean freight guides on this site
- Sea Freight from China: Complete Guide
- International Shipping Documents Checklist: Export, Transport & Customs Clearance
- China-to-US Ocean Freight Booking Timeline: SI, VGM and Cargo Cutoffs
- How to Calculate CBM for LCL Shipping from China
Related guides
- International Express Shipping Checklist: Courier Booking & Delivery
- Dangerous Goods Sea Freight Checklist: IMDG Booking & Handover
- Sea Freight from China: Complete Guide
- International Shipping Documents Checklist: Export, Transport & Customs Clearance
- China-to-US Ocean Freight Booking Timeline: SI, VGM and Cargo Cutoffs
- How to Calculate CBM for LCL Shipping from China
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What is the difference between FCL and LCL?
A full container load fills a whole container with one shipper's cargo, sealed under one seal and one bill of lading. A less-than-container load shares a container with other shippers' cargo, with each shipper's cargo listed separately and the container consolidated at a warehouse. Full container loads suit volumes that fill a container; smaller volumes usually travel as less-than-container load. The measured volume in cubic metres decides which service fits.
What is the verified gross mass, and why does the carrier need it?
The verified gross mass is the weighed mass of the packed container, including the cargo, the packing and the container itself, declared by the shipper. The carrier and the terminal use it to plan the stow and to check that the container is within the limits for the vessel and the terminal equipment. Weigh the container before the cut-off and declare the figure the carrier asks for; a missing or mismatched figure can hold the container at the terminal.
What should I check on the bill of lading draft before it is released?
Check the shipper, the consignee and the notify party, the port of loading and the port of discharge, the container and seal numbers, the cargo description, the weight and the volume, all against the booking confirmation and the shipping instruction. Correct any error before the draft is released: an error on the released bill of lading needs the carrier's approval to amend, and the consignee needs the correct document to clear the goods.