ANELGO GLOBAL LOGISTICS
Shipping guides / Guides · Bill of lading and packing list consistency checklist

Bill of Lading and Packing List Consistency Checklist: 30 Cross-Checks Before Issue

Guides · Bill of lading and packing list consistency checklist · Reviewed November 18, 2026 · 10 minute read

Two blank shipping documents side by side on a wooden desk with a magnifying glass and a pen, a container port softly blurred in the background
Illustrative AI-generated image.

The bill of lading and the packing list describe the same shipment twice, and the two versions must agree. A quantity that differs, a consignee spelled two ways, or a mark on one paper only can hold the goods. This checklist compares both papers line by line, before issue.

How to use this checklist

This page covers the comparison between the two documents only: reading the bill of lading against the packing list, field by field, and finding every place where the two versions disagree. It does not repeat the bill of lading checklist, which checks the bill of lading itself field by field, or the packing list checklist, which checks the packing list itself field by field. It does not repeat the shipping marks checklist, which checks the marks on the cartons, or the international shipping documents checklist, which lists the papers in a shipment file. Use this page after both papers are drafted and before either one is issued.

Work through the four stages in order, with the bill of lading and the packing list open side by side, and the commercial invoice beside them for the goods description and the quantities. Read each field on one paper against the same field on the other, and write the difference on the file where the two versions disagree. Do not correct one paper from memory: ask the shipper, the buyer or the freight forwarder in writing which version is right, and keep the written answer with the shipment file.

The shipper states what was packed, the carrier states what was received for carriage, and the buyer reads both papers on arrival to find the right cartons, so an error can enter at any of those three points. A difference found before issue is a correction on paper; a difference found after the originals are issued needs the carrier's agreement and the originals back. Check both papers while they are still drafts, and keep a copy of the corrected file apart from the originals.

Stage 1 — Parties and document references

Stage 1 covers who the papers name and how the papers refer to each other: the shipper, the consignee and the notify party, and the numbers that tie the bill of lading to the packing list. A consignee spelled two ways, or a notify party named on one paper and left off the other, is the difference most often found.

Read the names beside the order and the booking, and ask whether either paper alone shows who ships the goods, who receives them and who is to be told on arrival. Where the buyer asked for a code in place of a name, use the code the buyer gave in writing. Where the port on one paper differs from the port on the other, ask the freight forwarder in writing which version is right.

Stage 2 — Goods facts compared line by line

Stage 2 covers the goods themselves: the description, the quantity, the unit and the carton count, read line by line on both papers. A quantity that differs between the papers, or a description that names the goods one way on the bill of lading and another way on the packing list, is a common reason the goods are held.

Read the goods lines on the packing list beside the goods lines on the bill of lading, and ask whether each line on one paper has a matching line on the other. Where a line is split across cartons, check the split on both papers. Where the goods are described by a code, use the code the buyer gave in writing.

Stage 3 — Weights, carton counts and shipping marks

Stage 3 covers the figures that must match to the last digit: the gross weight, the net weight, the carton count and the shipping marks. A weight that differs between the papers, or a shipping mark that appears on one paper and not the other, is a common reason the papers are sent back for correction.

Read the weights and the carton count on the packing list beside the same figures on the bill of lading, and ask whether they agree everywhere. Count the carton numbers again from the first carton to the last. Where the marks on the cartons differ from the marks on either paper, correct the paper, not the cartons, until the marks agree.

Stage 4 — Final sign-off before issue

Stage 4 covers the last read of both papers together: the freight term, the clean bill, the signatures and the copies. A freight term that differs between the papers, or a signature missing from one paper, is a common reason the papers cannot be used as they stand.

Read both papers once more from the first line to the last, with the commercial invoice beside them, and ask whether every field still has a match on the other paper. Where a correction was made, check that the same correction was made on both papers, and that the corrected line is clear to read. Keep the corrected file with the shipment file, and keep a copy apart from the originals.

What to do with each difference found

Every difference between the two papers has one first step: a name is settled with the buyer, a figure with the shipper, a carton count by counting again, and a freight term or a port with the freight forwarder. Use the table to find the first step, and correct both papers to the same version.

Difference foundWhen it appliesWhat to do first
A name spelled two waysThe shipper, consignee or notify party is spelled one way on the bill of lading and another way on the packing listAsk the buyer in writing which spelling is right, and correct both papers to that spelling
A quantity or a weight differsThe quantity, the gross weight or the net weight on one paper differs from the same figure on the otherAsk the shipper in writing which figure is right, and correct the wrong paper before either one is issued
A carton count or a mark differsThe carton count, a carton number or a shipping mark on one paper differs from the other paper or from the cartonsCount the cartons again from the first to the last, and correct the papers so the count and the marks agree with the cartons
A freight term or a port differsThe freight term, the port of loading or the port of discharge differs between the two papersAsk the freight forwarder in writing which version follows the booking, and correct both papers to that version

Common reasons the bill of lading and the packing list disagree

Most differences between the two papers come back to the same few causes. The packing list is finished first and the bill of lading is drafted from it, so a line copied by hand can carry a spelling error or a wrong figure into the second paper. The shipper's instructions are corrected after the draft is sent, and the correction reaches one paper and not the other. A carton is repacked after the packing list is finished, and the new weight or count is written on one paper only. A name is written from memory on one paper and from the order on the other, so the two spellings differ.

The fix is the same in each case: finish the packing list first, draft the bill of lading from it, and read the two papers against each other before either one is issued. Where a correction is made, make it on both papers at the same time, and ask the shipper, the buyer or the freight forwarder in writing where the right version is still in question. Keep the written answer with the shipment file, so the next shipment starts from a correct file.

What this checklist cannot decide

This checklist cannot decide the value of the goods: the bill of lading and the packing list state what was shipped and how much of it, not what it was sold for, and the value follows the commercial invoice. It cannot set the duty: that follows the goods themselves and the papers beside them. It cannot say whether papers with a difference will be held.

It also cannot replace buyer, carrier or customs office advice on a specific shipment. Where a request names a field this checklist does not cover, or a figure is disputed, ask the buyer or the freight forwarder in writing. It cannot file papers for goods never booked, and it cannot turn a bill of lading issued with the wrong consignee into a correct one without the carrier's agreement and the originals back.

Export guides on this site

Related guides

Official references

Note: This guide provides general logistics planning information. It is not legal, customs, tax, safety or carrier acceptance advice. Requirements, services and schedules depend on the actual goods, route, contract, provider and current rules. Verify shipment-specific questions with the responsible carrier, customs broker or authority before dispatch.

For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.

Request a shipment review ↗

Frequently asked questions

Which paper wins when the bill of lading and the packing list disagree?

Neither paper wins on its own. The bill of lading is the carrier's transport document, and the packing list is the shipper's statement of what was packed, so a difference between them means one of the two is wrong. Correct the wrong paper so the parties, the goods, the quantities, the weights and the marks agree on both papers. Customs and the receiver read both papers, and the goods can be held where the two versions do not agree.

Should the packing list be finished before the bill of lading is drafted?

Yes, in practice. The carrier drafts the bill of lading from the shipper's instructions, which follow the packing list, so a packing list finished first gives the draft a correct starting point. Check the draft bill of lading against the finished packing list before the carrier issues the originals, and correct any difference on the draft, not after issue.

What if the goods are already loaded when a difference is found?

Tell the carrier and the buyer in writing at once. A difference found after loading can still be corrected on the papers before the bill of lading is issued. Once the originals are issued, a correction needs the carrier's agreement and the originals back, so this check belongs before issue, while a correction is still a change on paper.

← More shipping guides