ANELGO GLOBAL LOGISTICS
Shipping guides / Guides · Shipping marks checklist

Shipping Marks Checklist: 30 Checks Before the Cartons Are Marked

Guides · Shipping marks checklist · Reviewed November 18, 2026 · 10 minute read

Close-up of a blank shipping-mark stencil label on a sealed cardboard carton beside a blank label sheet and a pen, with a container port softly blurred in the background
Illustrative AI-generated image.

Shipping marks tie cartons to the packing list, the invoice and the bill of lading. A wrong consignee name, or a carton number that skips a number in the sequence, can leave a carton unclaimed. This checklist lists thirty checks in four stages, to complete before the cartons are marked.

How to use this checklist

This page covers shipping marks only: the checks to complete before the cartons are marked — the mark content, the carton numbers and the match with the packing list and the bill of lading, the placement and the durability of the marks, and the special marks a shipment needs. It does not repeat the packing list checklist, which checks the packing list itself field by field and covers marks as one stage among many. It does not repeat the bill of lading checklist. It does not repeat the international shipping documents checklist, which lists the papers in a shipment file. It does not repeat the article on shipping marks for China exports, which explains in prose what to put on master cartons, with no checkbox list. It also does not repeat the container loading checklist, which covers loading photos, weight and securing and mentions marks once. Use this page to check the marks themselves.

Work through the four stages in order, with the packing list, the commercial invoice and the bill of lading open beside this page. Read each mark on the cartons against the same mark on the papers, and ask whether the consignee, the destination, the carton number and the marks agree everywhere. Where a mark differs between the cartons and a paper, mark it on the file and ask the buyer or the freight forwarder in writing what is needed before the cartons are marked.

The exporter states what was packed, the buyer reads the marks to find the right cartons on arrival, and the warehouse at the destination reads them against the packing list, so an error can enter at any of those three points. Ask for every mark, carton number and special request in writing, and keep the written answers with the shipment file.

Stage 1 — Mark content

Stage 1 covers what the mark says: the consignee, the destination, the carton number, the order reference and the goods. A mark that names the wrong consignee, or a destination code that does not match the booking, is the error most often found.

Read the mark content beside the order and the booking, and ask whether a stranger could tell where the carton goes from the mark alone. Where the buyer asked for a code in place of a name, use the code the buyer gave in writing. Where the destination differs from the port on the booking, ask the freight forwarder in writing which version is right.

Stage 2 — Carton numbers and the match with the packing list and bill of lading

Stage 2 covers the numbers and the match: the carton number sequence, and the agreement between the marks on the cartons and the marks on the packing list, the invoice and the bill of lading. A carton number that is used twice, or a mark that differs from the packing list, is a common reason a carton cannot be tied to the papers.

Read the marks on the cartons beside the packing list, line by line, and ask whether the carton numbers run in sequence with no number skipped and no number used twice. Count the cartons again from the carton numbers. Where a carton is repacked, write the new carton number on the packing list before the cartons are marked.

Stage 3 — Placement and durability of the marks

Stage 3 covers where the marks sit and whether they stay readable: the face of the carton, the size of the letters, and the fix that holds the mark through handling. A mark hidden under tape, or a label that peels off in transit, is a common reason a carton cannot be found on arrival.

Look at the cartons as the receiver will see them: can the marks be read without moving the carton? Where the cartons are stacked or palletised, check the marks again after the stacking, and move any mark that is covered to a face that can be seen. Where a label is glued on, press it flat and check that no corner lifts.

Stage 4 — Special marks and the final check

Stage 4 covers what the buyer asked for in particular, and the last read of the marks against the papers: the barcode or label the receiver needs, the handling marks for goods that need special care, and the final match with the papers. A special mark asked for in writing and left off the cartons is a common reason a shipment is held at the destination.

Read the buyer written requests beside the cartons: is every special mark the buyer asked for on the cartons and on the packing list? Read the marks once more against the packing list and the bill of lading before the cartons leave, and keep a record of the marks with the shipment file.

Which part of the marks needs the closest look first?

Every shipment has one part of the marks that needs the closest look: a first shipment to a new buyer needs the mark content first, a shipment with many cartons needs the carton numbers first, marks that differ from the papers need the match first, and a buyer request needs the special marks first.

CaseWhen it appliesWhat to check first
First shipment to a new buyerThe buyer is new, and the consignee name and the destination have never been checkedStart at Stage 1, confirm the consignee and the destination in writing, and check the order reference
Shipment with many cartonsThe shipment covers many cartons, and a carton number can be skipped in the sequenceStart at Stage 2, count the carton numbers again from the first to the last, and check the total count
Marks differ between the cartons and the papersThe marks on the cartons differ from the marks on the packing list or the bill of ladingStart at Stage 2, read the marks on the cartons against the packing list line by line, and correct the papers
Buyer asked for special marksThe buyer asked for a barcode, a label or handling marks in writingStart at Stage 4, confirm each special mark against the written request, and check it on the cartons

Common reasons shipping marks cause problems

Most marks cause problems for the same few causes. The consignee name on the mark differs from the name on the order, so the carton cannot be tied to the buyer. A carton number is used twice, or a number is skipped in the sequence, so the count on the papers cannot be trusted. The marks on the cartons differ from the marks on the packing list, so the cartons cannot be tied to the papers. A mark is hidden under tape or behind a pallet edge, so the receiver cannot read it without moving the carton.

The fix is the same in each case: write the consignee and the destination from the order and the booking, read the marks on the cartons against the packing list and the bill of lading line by line before the cartons are marked, and count the carton numbers again from the first to the last. Check the placement of the marks after the cartons are stacked, and ask the buyer in writing where a mark is still in question. Keep the written answer with the shipment file, so the next shipment starts from a correct file.

What this checklist cannot decide

This checklist cannot decide the price of the goods: shipping marks state where the cartons go and what is inside them, not what they were sold for, and the price follows the commercial invoice. It cannot set the duty: that follows the goods themselves and the papers beside the marks. It cannot say whether marks with an error will be held at the destination.

It also cannot replace buyer or customs office advice on a specific shipment. Where a request names a mark this checklist does not cover, or a carton number is disputed, ask the buyer in writing. It cannot file marks for cartons never booked, and it cannot turn marks printed with the wrong consignee into correct ones without a fresh check of the cartons and the papers.

Export guides on this site

Related guides

Official references

Note: This guide provides general logistics planning information. It is not legal, customs, tax, safety or carrier acceptance advice. Requirements, services and schedules depend on the actual goods, route, contract, provider and current rules. Verify shipment-specific questions with the responsible carrier, customs broker or authority before dispatch.

For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.

Request a shipment review ↗

Frequently asked questions

What must shipping marks show?

They show who receives the cartons and where they go, the carton number and the total carton count, the order reference where one was agreed, the goods description or goods code, the country of origin where asked for, and the handling marks where the goods need them. The buyer reads them to find the right cartons on arrival, and the warehouse at the destination reads them against the packing list. They do not state prices: the commercial invoice shows those. They do not prove the goods were shipped: the bill of lading shows that.

Where on the carton do shipping marks go?

On the same face of every carton, where the receiver can see them, and clear of tape, straps and pallet edges. Where the buyer asks for marks on two faces, put the same marks on both faces. Check the marks again after the cartons are stacked or palletised, and move any mark that is covered to a face that can be seen.

What happens if the marks do not match the packing list?

The cartons and the papers do not agree with each other, and the buyer or the customs office at the destination can ask for the error to be fixed. Correct the marks or the papers so the consignee, the destination, the carton numbers and the marks agree with the packing list, and check the bill of lading at the same time. Keep the corrected file with the shipment file, and keep a copy apart from the original.

← More shipping guides