FBA Inbound Shipment Checklist: Prep, Packing & Carrier Handover

An FBA inbound shipment is a chain of small checks: the shipment created in Seller Central, the units prepped and labelled, the cartons packed to the fulfilment centre's limits, and the carrier handover with tracking. Miss one check and the chain breaks at the warehouse door.
How to use this checklist
This page is a working tool, not a summary. Tick each item only when the named check has been done and the result is in front of you. A tick means the item was verified, not that the shipment is accepted: Amazon and the carrier each run their own checks at receiving, and only they decide whether the shipment is received as sent.
This checklist covers the inbound leg only: creating the shipment in Seller Central, prepping and labelling the units, packing the cartons, and handing the shipment to the carrier. It does not cover the export documents for the China leg or the customs file for the United States: the FBA shipping checklist on this site covers carton labels, customs and delivery from China, and it is linked below for shipments leaving China.
Work through the four stages in order. Stage 1 settles what is shipping and where it is going, Stage 2 the prep and labels on each unit, Stage 3 the cartons, and Stage 4 the carrier handover and tracking. If an item in an early stage cannot be ticked, stop there: a label printed from the wrong shipment plan has to be reprinted, and a carton packed from the wrong contents list has to be repacked, and both cost more after the goods have left the warehouse.
Stage 1 — Before you create the shipment
Nothing else in this checklist works until the shipment is created in Seller Central. The shipment creation step sets the destination fulfilment centre, the shipment ID, and the contents list that every label and carton follows. Confirm the selling account, the marketplace, the ship-from address, and the product listings before creating the shipment: the SKU, the ASIN and the condition must be right for each unit, and the quantity must match the units on hand.
Check the prep category for each product before the shipment is created. Some products need standard prep only, and some need extra prep such as poly-bagging, bubble wrap or taping, and the prep category decides what the fulfilment centre expects to find on each unit. Check the dangerous goods status at the same time: restricted products are flagged before packing, not after the cartons are sealed, and the carrier and service are chosen with the delivery appointment route confirmed where the carrier requires one.
Stage 2 — Prep & labelling
Every unit that enters a fulfilment centre carries a scannable FNSKU label, and the label is what ties the physical unit to the listing. Place the label where the fulfilment centre can scan it without opening the unit, and cover the manufacturer barcode where Amazon requires the FNSKU label instead, so the wrong code is not scanned at receiving. A label that cannot be scanned is a unit that cannot be received as listed.
Prep protects the unit and the next unit in the carton. Units that need it are poly-bagged with the bag sealed and the suffocation warning visible, sets and multipacks are bundled and labelled as a single sellable unit, and expiry-dated units carry the expiry date with the earliest date on the outside. Fragile units are protected with bubble wrap or equivalent cushioning, loose items are secured so nothing moves or falls out, and a sample unit is scanned and checked against the listing before the full run is labelled.
Stage 3 — Carton packing
Cartons are packed to the fulfilment centre's limits, and the limits are Amazon's published carton limits: confirm them in Seller Central before packing, because a carton over the limit is a carton the fulfilment centre can refuse. Fill each carton so the units cannot shift, with void fill where needed, and mark heavy cartons so the carrier and the fulfilment centre can handle them safely. One shipment per carton: units from different shipments are not mixed in one carton, because a mixed carton cannot be matched to a single contents list.
Each carton gets its own packing list, matching the units inside, and its own FBA carton label on the outside: one label per carton, flat, uncovered and scannable. The label is checked against the carton contents before the carton is sealed with packing tape, and the sealed carton is checked again before it leaves the packing bench, because a label error found at the fulfilment centre is a carton that has to come back.
Stage 4 — Carrier handover & tracking
The handover is the point where the shipment leaves your control, so the contents are confirmed in Seller Central before the carrier collects, and the carrier is booked with the pickup or drop-off arranged. Palletised freight is built, wrapped and labelled before the truck arrives, with the delivery appointment confirmed, and the carrier tracking number is recorded against the shipment ID so the shipment can be followed from collection to receiving.
Keep the proof of collection or drop-off with the shipment file, and check the shipment status in Seller Central after handover, flagging any exception to the carrier. When delivery is confirmed at the fulfilment centre, check the received quantity against the shipped quantity: a shortfall is raised with the carrier and with Amazon from the shipment file, with the tracking record, the packing lists and the proof of handover attached.
Small-parcel delivery or palletised freight?
Use this table to choose how the shipment travels. Read the row that matches the shipment size and the destination count, then check the third column before booking. A shipment that Amazon splits across destinations is not one shipment with two stops: each part is a separate shipment with its own shipment ID, labels and contents list, and each part is packed and labelled for its own destination.
| Shipment | Send as | What to check before booking |
|---|---|---|
| A small number of cartons, each packed within the carton limits | Small-parcel delivery (SPD): one label per carton, sent through a parcel carrier | Every carton label scans and matches the carton contents; carrier collection or drop-off arranged |
| Palletised cartons, one destination | Less-than-truckload (LTL): pallets on a shared truck, with pallet labels | Pallet build and wrapping checked; delivery appointment at the fulfilment centre confirmed |
| A full trailer of pallets, one destination | Full truckload (FTL): one trailer for the whole shipment | Trailer loading and sealing checked; delivery appointment at the fulfilment centre confirmed |
| Amazon splits the shipment across destinations | Split shipment: each part travels as its own shipment | Each part gets its own shipment ID, labels and contents list; pack and label each part for its own destination |
Common reasons FBA shipments are held at the fulfilment centre
Most holds come back to the same few errors. A carton arrives without a readable FBA label, so the fulfilment centre cannot match it to a shipment. The units inside a carton do not match the contents list for that shipment, so the count cannot be reconciled. A pallet arrives without a delivery appointment, or the appointment details do not match the truck, so the dock cannot receive it. Or the shipment was created for one destination and sent to another, so the receiving centre has no record of it.
The fix is the same in each case: correct the shipment in Seller Central, reprint the labels or repack the carton from the corrected contents list, and send the corrected shipment to the destination on its plan. Do not relabel a carton by hand at the dock, and do not move units between shipments after Amazon has split the plan: a carton that does not match its shipment ID is a carton that has to be opened and checked by hand, and that holds the whole shipment.
What this checklist cannot decide
This checklist covers the inbound checks for an FBA shipment. It does not replace Amazon's published prep and packing requirements, which change by product and by fulfilment centre, and which Seller Central states for the shipment in front of you. It also does not replace the carrier's acceptance rules or the destination customs rules, which the carrier and the broker must confirm for the shipment in front of you.
The checklist also does not decide the shipment destination, the split across fulfilment centres, or the delivery appointment. The destination and the split follow Amazon's allocation of inbound inventory, the appointment follows the carrier and the fulfilment centre, and the carton limits follow Amazon's published limits. Where any of these is unclear, check Seller Central or ask the carrier before the labels are printed, and do not copy the entry from a similar shipment.
FBA guides on this site
- Amazon FBA and Warehousing for China–US Shipments: Complete Guide
- Shipping from China to Amazon FBA USA: Carton Labels, Customs & Delivery Checklist
- Apparel Carton Labels for US Warehouse Receiving: SKU and PO Checklist
- Shipping Marks for China Exports: What to Put on Master Cartons
Related guides
- Amazon FBA and Warehousing for China–US Shipments: Complete Guide
- Shipping from China to Amazon FBA USA: Carton Labels, Customs & Delivery Checklist
- Apparel Carton Labels for US Warehouse Receiving: SKU and PO Checklist
- Shipping Marks for China Exports: What to Put on Master Cartons
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What is the difference between small-parcel delivery and less-than-truckload for FBA?
Small-parcel delivery sends individual cartons, each with its own FBA label, through a parcel carrier. Less-than-truckload sends palletised freight on a shared truck, with pallet labels and a delivery appointment at the fulfilment centre. Small shipments of a few cartons usually travel as small-parcel delivery; larger palletised volumes usually travel as less-than-truckload. The shipment creation step in Seller Central shows which options apply to the shipment in front of you.
Why does Amazon split my shipment into more than one destination?
Amazon allocates inbound inventory across fulfilment centres by capacity and demand, so one shipment plan can produce several shipments, each with its own destination, shipment ID, labels and contents list. Treat each part as a separate shipment: label and pack it for its own destination, and do not move units between parts after the split.
What happens if a carton arrives without a readable FBA label?
The fulfilment centre cannot match the carton to a shipment, so the carton can be held for identification, returned to the sender, or received with the contents checked by hand. Any of these outcomes slows receiving. Check every label before the carrier collects: flat, uncovered, scannable, and matched to the carton contents.