Sea Waybill and Commercial Invoice Consistency Checklist: 30 Cross-Checks Before the Waybill Is Signed

A sea waybill and the commercial invoice are read before the waybill is signed: read the consignee and the notify party against the consignee and the notify party, read the piece count and the weights against the invoiced goods, and read the declared value basis against the invoice value.
How to use this checklist
This page covers the reading of a sea waybill against the commercial invoice only: the consignee and the notify party read against the consignee and the notify party, the piece count and the weights read against the invoiced goods, the declared value basis and the freight term read against the invoice value, the ports and the vessel read against the invoice, and the copies and the originals counted. It does not repeat the sea waybill issuance checklist or the commercial invoice checklist.
Work through the four stages in order, with the sea waybill, the commercial invoice and the booking open on the desk. Read every line on the sea waybill against the line that answers it on the commercial invoice, and ask the carrier and the seller in writing where one reads differently.
The carrier, the shipper and the consignee each see a different part of the shipment. Tell each party where one reads differently.
Stage 1 — Consignee, notify party and shipper read against the invoice parties
Stage 1 covers the consignee, the notify party and the shipper read against the invoice parties. A consignee the invoice does not name is the loose end found most often.
Read the parties with the invoice beside the sea waybill.
Stage 2 — Piece count, weights, volume and marks read against the invoiced goods
Stage 2 covers the piece count, the weights, the volume and the marks read against the invoiced goods. A carton the invoice does not count is the gap found most often.
Read the goods first, then the marks. Where a line reads differently, ask the shipper and the seller.
Stage 3 — Declared value basis, invoice value and freight term read against the invoice
Stage 3 covers the declared value basis, the invoice value and the freight term read against the invoice. A declared value basis the invoice value does not support is the gap found most often.
Read the value basis first, then the freight term. Where a line reads differently, ask the seller before the waybill is signed.
Stage 4 — Ports, vessel, copies and the two papers read as one file
Stage 4 covers the ports, the vessel and the copies read against the booking. A copy with no party named to receive it is the gap found most often.
Count the copies before the papers leave the desk. Where a line reads differently, ask the carrier before the waybill is signed.
Reading the consignee, the declared value basis and the freight term as one line from the sea waybill to the commercial invoice
The sea waybill and the commercial invoice are read as one line from the booking to the destination, and a break anywhere in the line breaks the whole read. The booking names the parties and the ports, the sea waybill is the paper the carrier will read at both ports, and the commercial invoice is the paper that states what the goods are and what the seller states they are worth in the terms the booking gives.
The consignee, the notify party and the shipper are the first place where the line parts ways. The booking names the sender, the party who will take the goods and the party the carrier will call on arrival; the sea waybill has to name the same parties. The commercial invoice names the consignee and the seller, and the seller has to be the sender. Where the sea waybill names a consignee the commercial invoice does not name, the line breaks.
The piece count, the weights, the volume and the marks are the second place where the line parts ways. The sea waybill names the piece count, and the commercial invoice names the piece count and the weight of each line. The sea waybill names the gross weight, and the commercial invoice names the gross weight and the net weight. Where the commercial invoice names goods the sea waybill does not count, the line breaks. The marks, the piece count, the weights and the volume have to read the same on both papers, or the line says nothing until the shipper and the seller confirm it in writing.
The declared value basis, the invoice value and the freight term are the third place where the line is read, and this place belongs to this pair of papers alone. The declared value basis on the sea waybill has to belong to the goods the commercial invoice names: where the basis reads differently from the invoice value, the invoice is read again before the waybill is signed. The invoice value has to fit the goods and the terms the commercial invoice states, and it is read against the goods on the sea waybill, not against the goods on any other paper. The freight term on the sea waybill has to be the term the commercial invoice states, and the trade term on the booking has to agree with both. Where the freight term names a term the booking does not name, the papers say nothing until the seller and the carrier confirm it in writing. The sea waybill carries no invoice value of its own, so the value is read on the commercial invoice alone.
The ports, the vessel, the copies and the currency are the last place where the line is read. They have to be the number and the names the booking gives, and each copy has to carry its number and name the party who receives it.
Which sea waybill line to ask about first when the commercial invoice reads differently
A party the commercial invoice does not name is settled with the carrier; a piece count or a weight that reads differently is settled with the shipper.
| Difference found | When it applies | What to do first |
|---|---|---|
| Consignee reading differently from the consignee on the commercial invoice | The two papers name different parties who take the goods | Ask the carrier and the seller in writing which party stands |
| Piece count reading differently from the piece count on the commercial invoice | The sea waybill and the commercial invoice count different pieces | Ask the shipper and the seller in writing which count stands |
| Declared value basis reading differently from the invoice value on the commercial invoice | The waybill basis and the invoice value do not agree for the same goods | Ask the seller in writing which value stands |
| Gross weight reading differently from the gross weight on the commercial invoice | The sea waybill and the commercial invoice give different gross weights for the same goods | Ask the shipper and the seller in writing which weight stands |
Why a sea waybill and a commercial invoice are sent back for correction before the goods sail
Most papers sent back for correction come back to a few causes. A consignee is named that the commercial invoice does not name, so the destination has no agreed party to answer for the goods. A notify party reads differently, so the carrier will call a party who knows nothing about the shipment.
The fix is the same in each case: name the party, name the paper that agrees it, and put the answer on the file.
A second cause is a declared value basis that reads differently from the invoice value on the commercial invoice, a third is a freight term that does not agree with the trade term on the booking, and a fourth is a goods description that reads differently from the goods the commercial invoice names.
A fifth cause is a sea waybill handed over with no commercial invoice beside it. Keep the sea waybill, the commercial invoice and the booking in one file.
What this sea waybill and commercial invoice comparison leaves open for the carrier and the seller
This checklist cannot decide whether a consignee named on the sea waybill can take the goods: the carrier and the consignee decide that.
It also cannot replace carrier or seller advice on a specific sea waybill or commercial invoice. Where a paper names a step this checklist does not cover, ask the carrier or the seller.
It also cannot say whether the goods inside the cartons match the commercial invoice: that rests with the loading record.
Export documents guides on this site
- Sea Waybill Issuance Checklist: 30 Checks Before the Waybill Is Issued
- Commercial Invoice Checklist: 30 Checks Before the Invoice Is Issued
- Sea Waybill and Certificate of Origin Consistency Checklist: 30 Cross-Checks Before the Waybill Is Signed
- Sea Waybill and Insurance Certificate Consistency Checklist: 30 Cross-Checks Before the Goods Sail
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
- Telex Release / Sea Waybill Checklist: 30 Checks Before the Goods Are Released
Related guides
- Sea Waybill and Export Declaration Consistency Checklist: 30 Cross-Checks Before the Waybill Is Signed
- Sea Waybill Issuance Checklist: 30 Checks Before the Waybill Is Issued
- Commercial Invoice Checklist: 30 Checks Before the Invoice Is Issued
- Sea Waybill and Certificate of Origin Consistency Checklist: 30 Cross-Checks Before the Waybill Is Signed
- Sea Waybill and Insurance Certificate Consistency Checklist: 30 Cross-Checks Before the Goods Sail
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
- Telex Release / Sea Waybill Checklist: 30 Checks Before the Goods Are Released
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
- IATA: Cargo
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What should be checked first when a sea waybill is read against the commercial invoice?
Read the consignee and the notify party against the consignee and the notify party first, then the piece count and the weights against the invoiced goods, then the declared value basis against the invoice value. Count the copies and the originals.
How does the declared value basis on a sea waybill connect with the invoice value on a commercial invoice?
The declared value basis has to belong to the goods the commercial invoice names, and the invoice value has to fit the goods and the terms the commercial invoice states. Where the basis reads differently from the invoice value, ask the seller in writing which value stands, and put the written answer on the file before the waybill is signed.
What happens when the gross weight on the sea waybill reads differently from the commercial invoice?
Ask the shipper and the seller in writing which weight stands, and put the written answer on the file before the waybill is signed. An invoice that weighs goods the sea waybill does not name says nothing until the shipper confirms it.