Telex Release / Sea Waybill Checklist: 30 Checks Before the Goods Are Released

Before the goods can move at the destination, the release method must be settled in writing. A telex release and a sea waybill free the goods in different ways, and each one asks for different papers. Check the method first, then work through the four stages below.
How to use this checklist
This page covers the choice between a telex release and a sea waybill, and the checks that settle that choice before the goods move. It does not repeat the bill of lading checklist, which checks the bill line by line, or the bill of lading and packing list consistency checklist, or the export declaration and bill of lading consistency checklist, which compare two papers field by field. It also does not repeat the short guide on original bills, sea waybills and express release, which explains which method fits which sale.
Work through the four stages in order, with the booking confirmation, the bill of lading draft, the sale contract and the carrier's release instructions open. Read each line of the release authorisation against the papers it names, and note where it asks for a paper the file does not hold. Do not answer from memory: ask the carrier in writing which paper is right, and keep the answer with the file.
The release is run by the carrier, and the consignee takes the goods, so a question answered to the carrier and a question answered to the consignee are not the same answer. Read the authorisation while the goods are still on the water, and check it against the bill before the vessel arrives.
Stage 1 — Choosing the release method
Stage 1 covers the choice itself: whether the goods travel on original bills, on a telex release or on a sea waybill, and who must agree before the booking is confirmed. A method changed after the bill is issued is the difference found most often here.
Read the sale contract beside the booking confirmation, and ask whether the method named on one matches the other. Where the contract asks for originals and the booking names a sea waybill, ask buyer and seller in writing which method stands.
Stage 2 — Telex release application and authorisation
Stage 2 covers the telex release itself: the application to the carrier, the surrender of the original bills, and the written authorisation that tells the destination agent to release them. A telex release asked for without the originals in hand is the gap found most often here.
Read the application beside the original bills, and ask whether each line of the application has a match on the papers. Where a bank holds the originals, ask the bank in writing when they will be surrendered, and do not ask the carrier to release the goods before that.
Stage 3 — Surrender of original bills
Stage 3 covers the surrender: the original bills handed back to the carrier, the endorsement where one is asked for, and the written record that they are no longer in circulation. An original left in circulation after a telex release is the mistake found most often here.
Read the surrender receipt beside the originals, and ask whether every original issued is named on it. Where the bill was issued in more than one original, ask the carrier in writing how many must be surrendered.
Stage 4 — Carrier release confirmation and sea waybill parties
Stage 4 covers the destination end: the carrier's confirmation that the goods may be released, and, where a sea waybill is used, the consignee and notify party who take them. A sea waybill consignee who cannot take the goods is the loose end found most often here.
Read the carrier's release confirmation beside the sea waybill or the telex authorisation, and ask whether the party named to take the goods is the party who will present themselves. Where the consignee has changed, ask the carrier in writing whether the waybill can be reissued.
Reading the surrender and release authorisation before the goods move
The surrender and release authorisation is the paper that moves the goods without the originals, and no other page on this site reads it line by line. It names the bill number, the vessel and the voyage, the container numbers, the party who surrenders the originals, and the party the carrier will release the goods to. Read each line of it against the bill of lading before the goods move: the bill number against the originals, the container numbers against the booking, the surrendering party against the holder named on the bill, the release party against the consignee in the sale contract. Where a line has no match on the papers, ask the carrier in writing which version is right, and keep the written answer with the authorisation. Do not let the goods move on a spoken promise.
What the authorisation does not say matters as much as what it says. It does not say the goods have been released, it does not say the consignee has taken them, and it does not set aside the carrier's own release rules: it asks the destination agent to release the goods to the party it names, once the carrier's checks are done. The seller's guess at when the release will come through is not the authorisation, and the forwarder's guess is not either. The authorisation also tells you which release method it belongs to: a telex release authorisation surrenders originals that were issued, while a sea waybill needs no surrender because no originals were issued. Do not surrender originals for a sea waybill, and do not ask for a telex release where no originals exist. After the release, read the confirmation against the authorisation, and keep the authorisation with the file.
Which step to confirm first for each release choice on the form
A telex release is settled with the carrier, a sea waybill with the consignee, a surrender with the holder of the originals, a missing confirmation with the destination agent.
| Difference found | When it applies | What to do first |
|---|---|---|
| Telex release asked for but the originals are still held by the bank | The telex release application is ready, but the bank still holds the original bills | Ask the bank in writing when the originals will be surrendered, then ask the carrier |
| Sea waybill named but the consignee reads differently from the contract | The sea waybill names a consignee who reads differently from the party named in the sale contract | Ask buyer and seller in writing which party takes the goods, then ask the carrier |
| Release authorisation signed by a party who does not hold the originals | The authorisation is signed by a party who does not hold the original bills | Ask the carrier in writing who must sign, then ask the holder of the originals |
| Carrier release confirmation missing from the file | The file holds the authorisation but no written confirmation | Ask the destination agent in writing whether the release is confirmed, then ask the carrier |
Why a telex release or a sea waybill is held up at the destination
Most holds come back to the same few causes in the file. The release method and the papers read differently: a telex release asked for while the originals are still held by the bank, a sea waybill named on the booking while the contract asks for originals, a consignee on the waybill who is not the party named in the contract. The authorisation is signed by a party who does not hold the originals, so the carrier cannot act on it.
The fix is the same in each case: settle the method first, read the authorisation against the bill before the goods move, and keep the file whole until the release is confirmed. Where a correction is made, make it on every paper at the same time, and ask in writing where the right version is in question.
A second cause is a paper filed from an earlier shipment: the consignee, the notify party or the method copied from the last shipment, and never checked against this one. A third is a consignee who changes after the waybill is issued, when the buyer names a new party to take the goods and the waybill is not reissued. Read the waybill against the contract as it stands, not as it stood at booking, and ask the carrier in writing where a line has moved.
What this release checklist leaves for the carrier and the consignee to decide
This checklist cannot decide whether the goods will be released: the carrier decides that, and the consignee takes the goods. It cannot say what the carrier will ask for next, or whether a further paper will be asked for after the authorisation.
It also cannot replace carrier or bank advice on a specific shipment. Where a request names a paper this checklist does not cover, or a release party is disputed, ask the carrier or the bank in writing. It cannot release goods the carrier has not agreed to release.
It also cannot say when the release will come through, or when the goods will move again: that rests with the carrier, and with the papers the release asks for. Where the release is still waiting, ask the carrier in writing what is still asked for, and keep the answer with the file.
Export guides on this site
- Bill of Lading Checklist: Parties, Freight Terms, Clean Bill & Originals
- Destination Port Customs Inspection Response Checklist: 30 Checks Before the Goods Are Opened
- Pickup After Customs Clearance Checklist: Delivery Order, Container & Return
- Original Bill of Lading, Sea Waybill or Express Release: What to Confirm
- International Shipping Documents Checklist: Export, Transport & Customs Clearance
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
Related guides
- Sea Waybill Issuance Checklist: 30 Checks Before the Waybill Is Issued
- Lost Bill of Lading Replacement Checklist: 30 Checks Before a New Bill Is Issued
- Bill of Lading Endorsement Checklist: 30 Checks Before the Bill Changes Hands
- Bill of Lading Checklist: Parties, Freight Terms, Clean Bill & Originals
- Destination Port Customs Inspection Response Checklist: 30 Checks Before the Goods Are Opened
- Pickup After Customs Clearance Checklist: Delivery Order, Container & Return
- Original Bill of Lading, Sea Waybill or Express Release: What to Confirm
- International Shipping Documents Checklist: Export, Transport & Customs Clearance
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
- IATA: Cargo
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What should I check first when the release method is still undecided?
Read the sale contract beside the booking confirmation, and ask the buyer and the seller in writing which method stands: original bills, telex release or sea waybill. The method must be settled before the bill is issued, because each method asks for different papers.
What if the carrier asks for the original bills after a telex release was agreed?
Ask the carrier in writing which originals are still asked for, and check the surrender receipt for those already surrendered. Do not send a copy where an original is asked for, and do not let the goods move until the carrier confirms the release in writing.
What if the sea waybill names a consignee who cannot take the goods?
Ask the carrier in writing whether the waybill can be reissued to the party who will take the goods, and ask buyer and seller in writing who that party is. Do not present a different party at the destination without the carrier's written agreement.