Sourcing Pre-Shipment Final Inspection Follow-Up Guide: From the Inspection Request to the Shipment Handover

Production closed is not a shipment ready to move. This guide walks through the final inspection follow-up: send the inspection request, confirm the inspector arrival, check the goods against the sealed sample and the specification, and settle the release decision or the rework decision on the inspection report.
How to use this guide
This guide covers pre-shipment final inspection follow-up only: sending the inspection request once production closes, confirming the inspector arrival, checking the goods item by item against the sealed sample and the specification, settling the release decision or the rework decision on the inspection report, and handing the shipment over once the inspection report answers for it. It does not repeat the sourcing mass production follow-up guide, which walks through the production milestones and the production closure that lead into the final inspection, or the Shenzhen electronics sourcing guide, which confirms the sample and the sealed sample before ordering and runs one pre-shipment inspection stage, or the sourcing inspection sampling guide, which draws a sample at arrival.
Work through the five stages in order, and do not hand the shipment over before the inspection report behind it is read. A shipment handed over before the inspection report is read may answer a specification the order never names. The order, the inspection report and the specification sheet are the only records the buyer and the supplier read.
Each stage keeps its own record: note the inspection request, the inspector arrival the stage answers for, and the sealed sample beside the request. A stage with no record is a stage the handover cannot answer for.
Stage 1 — Sending the inspection request once production closes
Send the inspection request once production closes: the inspection request the supplier names, the sealed sample beside the order, and the specification the inspection reads against. Send the request, the sample and the specification together, so the inspector and the supplier read the same goods.
Note the inspection request beside the order, with the sealed sample, the specification sheet, and the inspection scope for that request. Where the supplier names an inspection request with no sealed sample beside it, ask in writing for the sealed sample, so the request rests on a sample the supplier can show.
Stage 2 — Confirming the inspector arrival and the inspection scope
Confirm the inspector arrival and the inspection scope: the inspector the supplier names, the arrival the supplier confirms, and the goods the inspection covers. Ask the supplier in writing for the inspector arrival beside the inspection request.
Note the inspector arrival beside the inspection request: the arrival as it stands, the inspection scope as it stands, and the goods where the order names them. Where the inspector arrival stands with no inspection scope named, ask the supplier in writing what the inspection covers.
Stage 3 — Checking the goods item by item against the sealed sample and the specification
Check the goods item by item against the sealed sample and the specification: read the goods against the sealed sample, the material on the goods against the material the specification names, and the workmanship the goods show against the workmanship the specification names. A specification check read against the sealed sample reads the inspection as it stands, not as first named.
Where the goods and the sealed sample disagree, name the line that disagrees, and ask the supplier in writing to settle it before the inspection report is read. Where the goods show a defect the sealed sample never names, read the defect against the specification: a defect the specification never names answers goods the order never names. Where a component on the goods differs from the component on the sealed sample, read the difference against the specification.
Stage 4 — Reading the inspection report and settling the release decision or the rework decision
Read the inspection report and settle the release decision or the rework decision: read the inspection report against the specification, the release decision against the inspection report, and the rework decision against the defect the inspection report names. A release decision settled against the inspection report reads the goods as they stand, not as first named.
Where the same defect repeats on the inspection report, name the line that carries it, and ask the supplier in writing what stands behind the defect. Where a rework decision stays open after the inspection report, ask the supplier in writing whether the reworked goods answer the inspection report. Where the shipment is held back and the supplier names no rework, ask for the rework in writing before the shipment moves.
Stage 5 — Handing the shipment over once the inspection report answers for it
Hand the shipment over once the inspection report answers for it: read the inspection report against the last sealed sample, the release decision the report names, and the shipment the report names with the order. A handover confirmed against the inspection report reads the goods as they stand, not as first named.
Where the shipment stands ready for handover, note the handover beside the order, with the inspection report and the release decision, and tell the supplier in writing that the shipment stands handed over. Where the shipment does not stand ready, name the defect that still stands open, and ask for the rework in writing before the shipment moves. Where the release decision names a reworked line, confirm it in writing with the supplier.
Reading the inspection request, the inspector arrival, the sealed sample, the inspection report and the shipment handover as one line from production closed to the shipment handover
A final inspection is different from a promise to inspect the goods: the inspection travels with the order, and the order is read through the inspection it carries. The inspection request names where the follow-up starts, the inspector arrival names who reads the goods, the sealed sample names what the goods are read against, the inspection report names what the reading found, and the shipment handover names when the goods move, and the five are read together, not one by one.
The inspection request is set from the order because a request is not one request repeated: the request the supplier names once production closes, the request the buyer confirms beside the sealed sample, and the last request the handover answers for before the shipment moves. The request names the order, the sealed sample and the specification behind it.
The inspector arrival is read against the inspection request, not instead of it: the arrival the request names, the inspection scope the arrival names for each request, and the goods the arrival reads beside the sealed sample. An arrival that names no inspection scope reads as a reply, not as a check, and a reply does not answer the goods. The inspection report is the record the arrival rests on.
A single defect with no record reads as a single defect; the same unconfirmed defect at each reading reads as a pattern, and a pattern asks a different question: what stands behind the goods on the order. The reader notes the pattern on the inspection report and names the lines that carry it, so the buyer does not treat a pattern as a run of single defects.
The sealed sample is read beside the goods, not instead of them: the material as it stands, the component as it stands, and the workmanship as it stands beside the sample. A sealed sample read that names only the supplier reply reads only the supplier reply, and the goods go unread.
The release decision is read beside the inspection report, and it is read once: the defect the decision names, the specification the decision answers for, and the goods the decision rests on. The decision is read against the specification the order first confirmed, and a decision named again is settled with the supplier in writing before the shipment moves. A decision read twice is settled once, in writing, before the shipment moves, and the settlement stands on the inspection report.
The inspection request, the inspector arrival, the sealed sample, the inspection report and the shipment handover are read together. The request ties each order to where the follow-up starts, the inspector arrival ties the order to the goods each request carries, the sealed sample ties the goods to the workmanship, the inspection report ties the reading to the release decision, and the shipment handover ties the whole line back to the shipment handed over. Where any link in that line is missing, the missing link is settled with the supplier in writing before the shipment moves. The record the handover leaves behind names the request, the report and the decision together.
Which final inspection difference to settle first when the inspection report and the specification disagree
A final inspection difference is settled against the specification; a shipment is handed over against the inspection report.
| Difference found | When it applies | What to do first |
|---|---|---|
| The inspection request names no sealed sample beside the order | The request reaches the inspector with no sample to read against | Ask the supplier in writing for the sealed sample before the inspector arrives |
| The inspector arrival stands with no inspection scope named | The inspector arrives and the goods to be read are not named | Ask the supplier in writing what the inspection covers before the goods are read |
| The goods and the sealed sample disagree on a material | The material on the goods reads behind the material the specification names | Read the material, the component and the workmanship against the specification before the release decision |
| The inspection report names a defect the specification never names | The defect shows a specification the order never names | Ask the supplier in writing whether the defect stands on the specification or on the rework |
| The release decision and the rework decision both stand open | The inspection report leaves the shipment neither released nor held for rework | Ask the supplier in writing which decision the inspection report answers for before the shipment moves |
Why a final inspection is held back before the shipment handover
Most holds come back to a few causes. An inspection request is sent with no sealed sample beside the order, so the inspector reads the goods with no sample to read against. An inspector arrival stands with no inspection scope named, so the arrival reads only the arrival. An inspection report is read only at the handover, so the report reads only the handover, not the goods.
The fix is the same in each case: name the sealed sample, name the specification, and put the answer on the inspection report before the shipment moves.
Second is a supplier that names no rework for a defect the inspection report names, third a specification check that reads the goods against a specification the order never names, and fourth a release decision settled before the inspection report is read.
What this sourcing pre-shipment final inspection follow-up guide leaves open for the buyer and the supplier
This guide cannot decide whether a supplier will release a shipment the inspection report holds for rework: the supplier decides, and the buyer confirms it in writing with the supplier.
It also cannot replace buyer or supplier advice on a specific order. Where a supplier names a step this guide does not cover, ask the supplier.
It also cannot say whether the goods the final inspection never touched match the order: that rests with the goods the inspection names.
Sourcing and consolidation guides on this site
- Sourcing Mass Production Follow-Up Guide: From Mass Production Released to Production Closed
- Sourcing Purchase Order Delivery Follow-Up Guide: From the Order Placed to the Delivery Date Confirmed
- Shenzhen Electronics Sourcing and Pre-Shipment QC Guide: From Selection to the Consolidated Load
- Sourcing Inspection Sampling Guide: From the First Carton Draw to the Inspection Report
- Sourcing LCL Consolidation Guide: From Supplier Deliveries to One Consolidated Shipment
- How to Consolidate Orders from Multiple China Suppliers before Shipping to the USA
Related guides
- Sourcing Mass Production Follow-Up Guide: From Mass Production Released to Production Closed
- Sourcing Purchase Order Delivery Follow-Up Guide: From the Order Placed to the Delivery Date Confirmed
- Shenzhen Electronics Sourcing and Pre-Shipment QC Guide: From Selection to the Consolidated Load
- Sourcing Inspection Sampling Guide: From the First Carton Draw to the Inspection Report
- Sourcing LCL Consolidation Guide: From Supplier Deliveries to One Consolidated Shipment
- How to Consolidate Orders from Multiple China Suppliers before Shipping to the USA
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
- IATA: Cargo
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What should be sent first once production closes?
Send the inspection request first: the inspection request the supplier names, the sealed sample beside the order, and the specification the inspection reads against, so the inspector and the supplier read the same goods.
How should the goods be checked against the sealed sample and the specification?
Read the goods item by item against the sealed sample: read the material, the component and the workmanship on the goods against the specification — and where the workmanship on a component reads behind the sealed sample, note the component beside the inspection report.
What should be done when the inspection report names a defect?
Ask the supplier in writing what stands behind the defect, settle the rework decision where the defect cannot be cleared before the shipment moves — and confirm the release decision again before the shipment is handed over, so the handover reads the goods as they stand, not as first named.