Bill of Lading and Certificate of Origin Consistency Checklist: 30 Cross-Checks Before the Goods Move

The bill of lading proves the goods were loaded, and the certificate of origin states where those goods come from. A consignee named one way on the bill of lading and another way on the certificate can hold the goods at the port. Read both papers before the goods move.
How to use this checklist
This page covers the cross-check between the bill of lading and the certificate of origin only: reading the two papers against each other before the goods move. It does not repeat the bill of lading checklist or the certificate of origin application checklist, which check each paper on its own. It does not repeat the bill of lading and packing list, commercial invoice and certificate of origin, or packing list and certificate of origin consistency checklists, which compare those pairs instead.
Work through the four stages in order, with the bill of lading, the certificate, the commercial invoice and the packing list open. Read each field on the bill of lading against the same field on the certificate, and note where they disagree. Do not correct either paper from memory: ask the buyer, the carrier or the issuing body in writing which version is right, and keep the written answer with the shipment file.
The bill of lading is issued by the carrier, and the certificate is issued by the issuing body, so a correction on one paper does not reach the other by itself. A difference found before the goods move is a correction on paper; one found after the goods move needs a correction through the carrier and the issuing body. Check the two papers while both are drafts.
Stage 1 — Parties on both papers
Stage 1 covers the parties as the two papers name them: the shipper, the consignee and the notify party on the bill of lading, and the applicant and the consignee on the certificate. A consignee named one way on one paper and another way on the other is the difference found most often here.
Read the party lines on both papers beside the commercial invoice, and ask whether each name has a match on the other. Where the certificate names an applicant and the bill of lading a shipper, ask the buyer in writing whether the two still read as the same party.
Stage 2 — Goods name, ports and the voyage
Stage 2 covers the goods and the voyage: the goods name, the ports and the vessel. A goods name written one way on one paper and another way on the other can read as different goods.
Read the goods and voyage lines on both papers beside the packing list, and ask whether each line has a match on the other. Where the bill of lading shows a port and the certificate shows none, ask the buyer in writing whether the certificate still covers the shipment.
Stage 3 — Quantities, weights and shipping marks
Stage 3 covers the counts and the marks: the number of packages, the weights where shown, and the shipping marks. A package count that differs between the two papers, or a mark read from the wrong carton, is a common reason the papers are questioned.
Read the counts beside the packing list, and ask which basis each paper uses: the bill of lading counts the packages as loaded, the certificate states the quantity for the shipment. Where a count differs, read the bill of lading first.
Stage 4 — Origin statement, issuing body and the final read
Stage 4 covers the last read of both papers: the origin statement, the origin criterion, the issuing body that signs the certificate, and the carrier that issued the bill of lading. An origin statement that does not match the goods as loaded is the difference that can hold the goods at the port.
Read the two papers once more from the first line to the last, with the commercial invoice and the packing list beside them, and ask whether every field still has a match. Where a correction was made, check that it is signed and clear.
Reading the consignee, the notify party and the origin standard before the bill of lading is signed
The consignee and the notify party are where the bill of lading and the certificate part ways first, and no other page on this site covers it. The bill of lading names a consignee, the party entitled to take the goods at the port of discharge, and a notify party, the party the carrier tells when the goods arrive. The certificate names an applicant, the party that asked for the certificate, and a consignee, the party the goods are sent to. The two papers can each be right and still disagree: the applicant on the certificate is often the shipper on the bill of lading, written once as a full legal name and once as a short trading name. Where the certificate names the notify party as the consignee, the papers disagree. Read the party lines first: compare the consignee on the bill of lading only with the consignee on the certificate, then ask whether the certificate needs to name the notify party at all.
The origin statement is the second place the two papers part ways. The certificate states the origin criterion, the rule the issuing body used to decide where the goods come from, while the bill of lading names the goods only as a transport description, often in broader words. Where the bill of lading names a family of goods and the certificate names one kind within it, the origin statement may cover only part of the shipment. The two signatures answer to different reviews: the certificate is signed by the issuing body after it reviews the supporting papers, and the bill of lading is signed by the carrier once the goods are loaded. Neither body can correct the other paper: a change to the bill of lading needs the carrier, a change to the certificate needs the issuing body. Settle the parties first, then the goods name, then the origin statement, in writing with the buyer, the carrier or the issuing body, never by changing a name on one paper alone.
Which difference to settle first, and with whom
Every difference has one first step: a party name is settled with the buyer, a goods name with the packing list, a count with the bill of lading, an origin statement with the issuing body.
| Difference found | When it applies | What to do first |
|---|---|---|
| A consignee or notify party reads differently | The consignee or the notify party reads differently on the two papers | Ask the buyer in writing which party name is right, then ask the carrier and the issuing body to correct their own paper |
| A goods name reads as different goods | The goods name on the bill of lading reads as different goods from the certificate | Ask the buyer in writing whether the two lines name the same goods |
| A package count or a weight differs | The package count or the weight differs between the two papers | Read the bill of lading first to find the basis each paper uses, then ask in writing which is right |
| An origin statement does not match the loaded goods | The origin statement on the certificate does not match the goods as loaded | Read the bill of lading first, then ask the issuing body in writing |
Why the bill of lading and the certificate drift apart before the goods move
Most differences come back to the same few causes. The two papers are drafted from different instructions: the bill of lading from the shipping instruction and the certificate from the application instruction, so a correction made to one instruction reaches one paper and not the other. The consignee is shortened for the certificate, and reads as a different party. The goods name is copied from an earlier shipment, and never matches the goods in this shipment.
The fix is the same in each case: finish the bill of lading first, draft the certificate from it, and read the certificate against it before the goods move. Where a correction is made, make it on both papers at the same time, and ask in writing where the right version is in question. Read the parties first, then the goods name, then the marks.
What the bill-of-lading-to-certificate read leaves for the carrier and the issuing body to decide
This side-by-side read cannot decide the origin criterion of the goods: the bill of lading states the goods as loaded, and the origin follows the goods and the issuing body review. It cannot say whether a difference between the two papers will be accepted at the border: that follows the border practice.
It also cannot replace carrier or issuing body advice on a specific shipment. Where a request names a field this checklist does not cover, or an origin statement is disputed, ask the carrier or the issuing body in writing. It cannot issue a certificate for goods the bill of lading never names. It cannot say which paper a port will ask for first, because that follows the port practice for the shipment.
Export guides on this site
- Bill of Lading Checklist: Parties, Freight Terms, Clean Bill & Originals
- Certificate of Origin Application Checklist: 30 Checks Before You Apply
- Bill of Lading and Packing List Consistency Checklist: 30 Cross-Checks Before Issue
- Commercial Invoice and Certificate of Origin Consistency Checklist: 30 Cross-Checks Before the Certificate Is Issued
- Packing List and Certificate of Origin Consistency Checklist: 30 Cross-Checks Before the Certificate Is Issued
- International Shipping Documents Checklist: Export, Transport & Customs Clearance
Related guides
- Bill of Lading and Insurance Certificate Consistency Checklist: 30 Cross-Checks Before the Goods Move
- Bill of Lading Checklist: Parties, Freight Terms, Clean Bill & Originals
- Certificate of Origin Application Checklist: 30 Checks Before You Apply
- Bill of Lading and Packing List Consistency Checklist: 30 Cross-Checks Before Issue
- Commercial Invoice and Certificate of Origin Consistency Checklist: 30 Cross-Checks Before the Certificate Is Issued
- Packing List and Certificate of Origin Consistency Checklist: 30 Cross-Checks Before the Certificate Is Issued
- International Shipping Documents Checklist: Export, Transport & Customs Clearance
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
- IATA: Cargo
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
Does the certificate of origin need to show the same consignee as the bill of lading?
Yes. The consignee should read the same on both papers, so read the certificate to find whether the two lines name the same party, and ask the buyer in writing where they differ. Keep the written answer with the shipment file.
What if the notify party on the bill of lading has no match on the certificate?
Stop and settle it in writing before the goods move. The certificate names an applicant and a consignee, not a notify party, so ask the buyer in writing whether the consignee on the certificate is the party that should take the goods. Never change a party name on one paper without a written answer.
What if the origin statement on the certificate does not match the goods on the bill of lading?
Correct the wrong paper before the goods move. Read the bill of lading first to find which goods were loaded, and ask the issuing body in writing where the origin statement differs. Where the goods as loaded come from one country and the certificate names another, correct the certificate.