Dangerous Goods Sea Freight Checklist: IMDG Booking & Handover

A dangerous-goods sea booking is confirmed in stages: the goods are classified and described, the container service is chosen, the booking is placed and confirmed, and the container is packed, loaded and handed over with a bill of lading. This checklist walks through those four stages in order.
How to use this checklist
This page is a working tool, not a summary. Tick each item only when the named check has been done and the result is in front of you. A tick means the item was verified, not that the booking is confirmed: the carrier, the port and the terminal each run their own checks, and only they decide whether the goods are accepted.
This checklist covers the sea booking and handover only: getting the goods classified and ready, choosing the container service, placing the booking, and handing the container over with a bill of lading. It does not cover the air rules for the same goods: the dangerous-goods air checklist on this site covers those, and it is linked below. It also does not cover the sea-freight services and routes, or the export documents in detail: the sea-freight guide and the shipping documents checklist cover those, and both are linked below.
Work through the four stages in order. Stage 1 settles what is shipping and whether the port will accept it, Stage 2 the container service, Stage 3 the booking details and the documents, and Stage 4 the packing, loading and bill of lading. If an item in an early stage cannot be ticked, stop there: a booking placed from the wrong classification has to be amended, and a container loaded from the wrong plan has to be reworked.
Stage 1 — Before you request a booking
Nothing else in this checklist works until the goods are classified and described. The booking request states the goods, the class, the packing group, the quantity, the packed weight and dimensions, the port of loading and the port of discharge, and the ready date, and the carrier and the port quote and confirm from those details. Confirm the classification against the safety data sheet before requesting the booking: the class must be right for the goods, the packing group must match the hazard, and the segregation must be checked.
Check the goods against the safety data sheet and the goods on hand, not against the sales order alone. Check whether the port and the terminal accept the class for the sailing in front of you, because some restrict certain classes or require advance notice, and a booking for goods the port will not accept has to be reworked. Agree the Incoterms rule with the buyer or the seller and record the named place, and confirm the consignee and notify party details for the bill of lading before the booking is placed.
Stage 2 — Choosing FCL, LCL or consolidated
The container service follows the quantity, the class and the segregation. A full container load carries one shipper's goods in a container of their own, a less-than-container load shares container space with other shippers' cargo, and a consolidated service groups compatible shipments under one booking where the port accepts the mix. The quantity and the segregation decide which service fits, and the choice is made before the booking.
Check the class and the segregation where cargo is grouped, and the container size where a full container is chosen. A service that does not match the goods leaves the shipment waiting for the next sailing, and a consolidation plan that groups incompatible goods leaves the container refused at the terminal. Check the port acceptance for the service chosen, and confirm whether the booking is for a full container, a shared container or a consolidated group, because the packing and the handover follow the service chosen.
Stage 3 — Booking details & documents
The booking is placed with the carrier or the forwarder, and the booking confirmation is the document the rest of the checklist follows. Read the confirmation line by line when it arrives: the vessel, the ports, the container size and type, the weight and the volume, the cut-offs for the documents and for the container to reach the terminal, and the acceptance conditions. A detail that is wrong on the confirmation is wrong on the bill of lading unless it is corrected.
Prepare the documents the carrier asks for before the cut-offs. The dangerous goods declaration states the proper shipping name, the class, the packing group and the quantity, and it is signed by the shipper. The packing list states the cartons, the weight and the volume, the commercial invoice states the goods, the value and the payment terms, and the container packing certificate is prepared where the carrier or the port asks for it. Each document is checked against the booking confirmation so the names, the numbers and the cargo description match.
Stage 4 — Handover, loading & bill of lading
The container is checked before it is packed: the container is clean, dry and free of damage, the door seals close, and the container number matches the booking. The goods are packed to the packing plan, with the packages secured against movement, the marks and labels matching the documents, and the container placarded as the class requires. A container that does not match its booking is held at the terminal until the booking is corrected, so check the goods against the booking before the container leaves the warehouse.
Stow the goods to the stowage plan, with segregation kept between incompatible goods and the container loaded as the carrier directs, and keep a photo record of the packed container before the doors are closed. Declare the verified gross mass for the container as the carrier requires, and check the bill of lading draft against the booking confirmation before it is released. A draft error corrected before release is a correction; the same error on the released bill of lading is an amendment the carrier must approve. Track the vessel after handover, and watch for the arrival notice from the destination agent.
FCL, LCL or consolidated?
Use this table to choose how the goods travel. Read the row that matches the quantity, the class and the segregation, then check the fourth column before requesting the booking. A shipment that travels in a full container is not the same as a shipment that shares a container: the packing and the handover follow the service chosen, so the choice is made before the booking is placed, not after.
| Service | What it is | Use it where | What to check before booking |
|---|---|---|---|
| Full container load | One shipper's goods in a container of their own | A shipment that fills a container, or goods that must not share one | Container size and type, the packing plan, and the port acceptance for the class |
| Less-than-container load | Cargo sharing container space with other shippers' cargo | A smaller shipment that does not fill a container on its own | The segregation, the marks on each carton, and the consolidation plan |
| Consolidated | Compatible shipments grouped under one booking | Several smaller shipments of compatible goods on the same sailing | Each shipment listed separately, and the port acceptance for the combination |
Common reasons DG sea bookings are held or rejected
Most held bookings come back to the same few errors. The classification on the booking does not match the safety data sheet, so the carrier cannot accept the goods for the sailing. The port or the terminal does not accept the class, or the advance notice was not given, so the container is refused at the gate. The documents arrive after their cut-off, so the bill of lading cannot be issued for the booked sailing. Or the documents describe goods that do not match the cargo on hand, so the carrier holds the release until the description is corrected.
The fix is the same in each case: correct the booking with the carrier, submit the corrected document before the next cut-off, and rebook the goods where the carrier offers a later sailing. Do not send the container to the terminal after the cut-off and expect it to be loaded, and do not change the cargo description after the bill of lading is released without the carrier's approval: goods that do not match their booking are goods that wait at the port.
What this checklist cannot decide
This checklist covers the booking and handover checks for a dangerous-goods sea shipment. It does not replace the carrier's booking terms, which state the cut-offs, the charges and the acceptance rules for the sailing in front of you. It also does not replace the IMDG Code as published, or the port and terminal rules, which the carrier and the port must confirm for the shipment in front of you.
The checklist also does not decide the vessel, the sailing route, or the freight rate. The vessel follows the carrier's schedule, the route follows the service the carrier offers, and the rate follows the booking the carrier confirms. Where any of these is unclear, ask the carrier or the forwarder before the booking is placed, and do not copy the entry from a similar shipment.
Dangerous goods and sea freight guides on this site
- Dangerous Goods Air Freight Checklist: Documents, Packaging & Carrier Acceptance
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
- Sea Freight from China: Complete Guide
- Original Bill of Lading, Sea Waybill or Express Release: What to Confirm
Related guides
- Dangerous Goods Air Freight Checklist: Documents, Packaging & Carrier Acceptance
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
- Sea Freight from China: Complete Guide
- Original Bill of Lading, Sea Waybill or Express Release: What to Confirm
Official references
- IMO: International Maritime Organization
- IATA: International Air Transport Association
- ICAO: International Civil Aviation Organization
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What does the IMDG Code cover for a sea booking?
The IMDG Code is the international rulebook for dangerous goods carried by sea. It sets out how goods are classified into classes, how they are packed, marked and labelled, what the transport document must state, and how goods are stowed and segregated on board. The carrier and the port apply the Code as published, with their own acceptance rules on top, so check the class, the packing group and the segregation before the booking is requested.
When should dangerous goods travel FCL instead of LCL?
A full container load suits a shipment that fills a container on its own, or goods that must not share a container with other shippers' cargo. A less-than-container load suits a smaller shipment that shares container space, where the consolidator groups compatible goods and the port accepts the mix. The deciding factors are the quantity, the class and the segregation: where the goods cannot be stowed with other cargo, a full container is the workable choice. Check the acceptance rules before the booking is placed.
What should I check on the bill of lading draft before it is released?
Check the shipper, the consignee and the notify party, the port of loading and the port of discharge, the container number and the seal number, the gross weight and the verified gross mass, and the cargo description, all against the booking confirmation, the packing list and the dangerous goods declaration. Correct any error before the draft is released: an error on the released bill of lading needs the carrier's approval to amend, and the consignee needs the correct document to clear the goods.