Lost Bill of Lading Replacement Checklist: 30 Checks Before a New Bill Is Issued

A lost bill of lading is replaced, not reprinted: report the loss in writing, apply for a replacement with a letter of indemnity, let the carrier check its records, and take a new bill with the old bill cancelled. Work the stages in order, keeping every answer on the file.
How to use this checklist
This page covers the replacement of a lost bill of lading only: the loss found and reported, the replacement applied for with a letter of indemnity, the carrier checks, and the new bill issued with the old bill cancelled. It does not repeat the bill of lading checklist, the telex release checklist or the endorsement checklist.
Work through the four stages in order, with the copy of the lost bill and the packing list open on the desk. Read every line on the replacement against the copy of the lost bill, and do not answer from memory: ask the carrier in writing where a paper, a name or a number reads differently.
The shipper, the carrier, the bank and the consignee each see a different part of the bill, so a loss reported to one party is not a loss reported to all of them. Tell each party in writing, and keep every answer on the file.
Stage 1 — Loss found and reported
Stage 1 covers the loss found and reported: the search for the missing bill, the carrier and the forwarder told in writing, and the parties named on the bill told at the same time. A loss told only by word of mouth is the gap found most often.
Tell the carrier in writing as soon as the loss is found, with the bill number on the same page. Where the bill was last seen with a named party, tell that party in writing too, and ask the carrier what it needs next.
Stage 2 — Replacement applied for and the indemnity letter prepared
Stage 2 covers the replacement applied for and the indemnity letter prepared: the application in writing and the letter signed by the party who asks for the replacement. An application with no letter of indemnity is the gap found most often.
Apply in writing to the carrier, with the bill number, the goods and the parties named. Where the carrier asks for a bank countersignature on the letter, ask the bank in writing.
Stage 3 — Carrier checks and release arranged
Stage 3 covers the carrier checks and the release arranged: the carrier reading its own records and checking whether the original has been presented. A release arranged before the checks are done is the gap found most often.
Wait for the carrier to confirm its checks in writing before the goods are expected to move. Where the carrier names a condition for the release, ask for the condition in writing and keep it on the file.
Stage 4 — Replacement issued and the old bill cancelled
Stage 4 covers the replacement issued and the old bill cancelled: the new bill read line by line and the old bill noted as void on the carrier records. A new bill taken without reading it against the old copy is the gap found most often.
Read the replacement line by line against the copy of the lost bill before the goods are taken. Where a line reads differently, ask the carrier in writing before the replacement is used.
Reading the lost bill of lading as one file from the first notice to the new original
The lost bill of lading is read as one file, from the first notice to the new original, and a break anywhere in the file breaks the whole read. The loss is reported, the replacement is applied for, the letter is signed, the carrier confirms the original has not been presented, and the new bill is issued with the old bill noted as void. Each paper answers the one before it: the notice names the bill that is lost, the application names the bill to be replaced, the letter names the party behind the replacement, and the new bill names the same goods and the same parties as the lost one. A file with a missing paper cannot show that line.
The letter of indemnity is the paper that holds the file together. It is the written word of the party who asks for the replacement, and it says three things: which bill is lost, who asks for the new bill, and that the original will be returned to the carrier if it is found later. The carrier asks for it because the original may still surface and be presented by another party, so the carrier needs a named party standing behind the replacement before it issues a new bill. A letter that names no bill says nothing about which bill is lost. A letter signed by a party with no shown authority says nothing about who stands behind it. A letter silent on the original turning up later says nothing about what happens when it does. Where the carrier asks for a bank countersignature, the bank adds its name to the same letter.
The old bill is never truly gone until it is noted as void on the carrier records. A notice of loss tells the parties the bill is missing, but it does not cancel the bill: the original is still an original until the carrier records say otherwise, and a party who finds it later may still try to present it. That is why the replacement is marked as a replacement on its face, so it cannot be read as a second original, and why the file is kept together after the new bill is issued. Read the notice, the application, the letter and the new bill as one file, and ask the carrier in writing wherever the file breaks.
Which paper to ask for first when the lost bill of lading is reported
A missing bill is settled with the party who last held it, a replacement with the carrier, and a letter of indemnity with the party who signs it.
| Difference found | When it applies | What to do first |
|---|---|---|
| Bill last seen with a named party | The bill was with a forwarder, a bank or the consignee when it went missing | Ask the party who last held it in writing where it is |
| Replacement asked for with no letter of indemnity | The application names no letter and no party behind it | Ask the party who applies to prepare the letter first |
| Carrier records naming a different party to take the goods | The records name a party the application does not name | Ask the carrier in writing which party its records name |
| Original found after the replacement is issued | The lost bill turns up once the new bill is in use | Ask the carrier to take the original back and note it as void |
Why a replacement bill of lading request is sent back before the carrier acts on it
Most requests sent back before the carrier acts come back to the same few causes. The application names no letter of indemnity, so the carrier has no named party standing behind the replacement. The letter is signed by a party whose authority is not shown.
The fix is the same in each case: name the bill, name the party who asks, and put the letter on the file with the signature and the authority shown.
A second cause is a bill number that reads differently from the carrier records. A third is a letter silent on the original turning up later. A fourth is a file handed over in pieces: the notice with one party, the application with another, and the letter with a third.
A fifth cause is a release asked for before the carrier checks are done. Without the whole file, the carrier cannot read the loss against its records, and the request cannot move forward. Keep the notice, the application, the letter and the carrier confirmation together, and hand the file over whole.
What this lost bill of lading checklist leaves for the carrier and the consignee to decide
This checklist cannot decide whether a replacement bill will be issued: the carrier decides that from its records, the application and the letter of indemnity.
It also cannot replace carrier or bank advice on a specific bill. Where a request names a step this checklist does not cover, ask the carrier or the bank in writing.
It also cannot say whether the goods match the count on the packing list: that rests with the packing list check.
Export guides on this site
- Bill of Lading Checklist: Parties, Freight Terms, Clean Bill & Originals
- Telex Release / Sea Waybill Checklist: 30 Checks Before the Goods Are Released
- Bill of Lading Endorsement Checklist: 30 Checks Before the Bill Changes Hands
- Original Bill of Lading, Sea Waybill or Express Release: What to Confirm
- How to Review an Ocean Bill of Lading Draft for a China Import
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
Related guides
- Bill of Lading Checklist: Parties, Freight Terms, Clean Bill & Originals
- Telex Release / Sea Waybill Checklist: 30 Checks Before the Goods Are Released
- Bill of Lading Endorsement Checklist: 30 Checks Before the Bill Changes Hands
- Original Bill of Lading, Sea Waybill or Express Release: What to Confirm
- How to Review an Ocean Bill of Lading Draft for a China Import
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
- IATA: Cargo
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What should be done first when a bill of lading is found to be lost?
Tell the carrier and the forwarder in writing at once, with the bill number on the notice, and treat the original as unusable from that notice onward. Search where the bill was last seen, then ask the carrier in writing what it needs for a replacement.
What is a letter of indemnity, and why does the carrier ask for one?
A letter of indemnity is the written word of the party who asks for the replacement, stating that the original will be returned to the carrier if it is found later. The carrier asks for it because the original may still surface and be presented by another party, so the carrier needs a named party standing behind the replacement before it issues a new bill.
What happens if the lost original turns up after the replacement is issued?
Return it to the carrier at once and ask the carrier in writing to note it as void on its records. Do not use the original, do not pass it to another party, and do not destroy it: the carrier records are the place where the old bill is cancelled.