Container VGM Checklist: 30 Checks for Verifying Gross Mass Before Loading

The mass on the papers has to be the mass actually weighed, because a container is loaded on its verified gross mass. Read the weighing method, the weighing record and the papers as one line before the container leaves, and ask the carrier in writing where a figure reads differently.
How to use this checklist
This page covers the verification of the verified gross mass only: the weighing method chosen and agreed, the weighing record made and kept, the record read against the papers, and the overweight finding handled before loading. It does not repeat the VGM guide on this site, which explains what verified gross mass is, or the ocean freight booking checklist, which covers the booking, or the bill of lading checklist and the packing list checklist, which cover the papers themselves.
Work through the four stages in order, with the packing list, the bill of lading and the booking confirmation open on the desk. Read every figure on the weighing record against the papers, and do not answer from memory: ask the carrier or the forwarder in writing where a method, a figure or a unit reads differently.
The shipper, the carrier and the terminal each see a different part of the container, so a mass weighed at the yard and a mass read from the papers are not the same check. Read the method, the record and the papers together at each step, and keep every answer on the file with the record it answers.
Stage 1 — Weighing method chosen and agreed
Stage 1 covers the weighing method chosen and agreed: the method named in writing, the party named to weigh the container, and the weighing point named. A method agreed only by word of mouth is the gap found most often.
Agree the method with the carrier or the forwarder before packing starts. Where the booking confirmation names a different method from the one the yard uses, ask the carrier in writing which method stands.
Stage 2 — Weighing record made and kept
Stage 2 covers the weighing record made and kept: the container weighed as packed, the record written down at the weighing point, and the record kept with the file. A record written down later from memory is the gap found most often.
Write the record down at the weighing point, with the container number and the method on the same page. Where a reading is taken again, keep both readings on the file and write down which one stands.
Stage 3 — Record read against the papers
Stage 3 covers the record read against the papers: the weighed mass read against the bill of lading and the packing list, the weight basis on each paper compared, and late packing changes reconciled. A packing change made after the weighing is the gap found most often.
Read the record line by line against the bill of lading and the packing list, with the booking confirmation open beside them. Where a paper names a different weight basis, ask the party who issued it in writing which basis stands.
Stage 4 — Overweight found and settled
Stage 4 covers the overweight finding handled before loading: the container weighed again, the carrier asked in writing, and the load changed only with a fresh weighing. An overweight finding answered by changing the figure is the gap found most often.
Do not change the figure on the record to meet a limit: weigh the container again, and ask the carrier in writing what to do next. Where the load is changed, weigh it again and write a fresh record.
Reading the two weighing methods and the record trail as one line from the weighbridge to the bill of lading
The two weighing methods are two ways of reaching the same figure. Weighing the packed container reads the mass in one step, with everything on the scale at once. Weighing every item and adding the tare reads the same mass in many steps, with each item weighed on its own and the tare from the plate on the container added at the end. Either way the tare comes from the plate on the container. The method is a choice about how the mass is found, not a choice about what the mass is: where the two methods give different readings for the same container, the readings have to be settled in writing, and the record has to show which method was used and which reading stands.
The record trail runs in the same line, from the weighbridge to the bill of lading, and a break anywhere in the line breaks the whole read. The method is agreed in writing before packing starts, the container is weighed as packed, the record is written down at the weighing point with the container number, the method, the tare, the weighed mass and the name of the party who weighed it on the same page, and the record is read against the bill of lading and the packing list before the container leaves. A record without a method says nothing about how the mass was found. A figure without a record says nothing about what was weighed.
The line also has to match the container as packed, not as booked. A late packing change changes the mass, and the record has to be weighed again and written again before the papers are read. A weight basis that reads differently between the two papers is the same kind of break: one paper names the packed container while the other names the cargo alone. Read the method, the record and the papers as one line, and ask the carrier in writing wherever the line breaks, because a container is loaded on the strength of the mass that was actually weighed.
Which weighing record to ask for first when the figure on the papers reads differently
A method that reads differently is settled with the party who weighed the container, a figure that reads differently with the party who issued the paper, a weight basis that reads differently with the party who issued each paper, and an overweight finding with the party who changed the load.
| Difference found | When it applies | What to do first |
|---|---|---|
| Record naming a different method from the booking confirmation | The method on the record is not the method the carrier agreed | Ask the party who weighed the container in writing which method was used |
| Figure on the record reading differently from the bill of lading | The mass on the record is not the mass on the bill of lading | Ask the party who issued the bill of lading in writing to read the figure again |
| Packing list naming a different weight basis from the bill of lading | One paper names the cargo alone and the other names the packed container | Ask the party who issued each paper in writing which basis it names |
| Overweight finding with no fresh weighing on the file | The load was changed and the record was never weighed again | Ask the party who changed the load in writing to weigh the container again |
Why a VGM file is sent back before the container is loaded
Most files sent back before a container is loaded come back to the same few causes. The record was written down later from memory, and the mass on the file no longer matches the mass that was weighed. The method was agreed only by word of mouth, and the record and the confirmation name different methods.
The fix is the same in each case: agree the method in writing, weigh the container as packed, and write the record down at the weighing point.
A second cause is a figure changed to meet a limit instead of the load. A third is a late packing change never reconciled with the record. A fourth is a weight basis that reads differently between the bill of lading and the packing list, with no one asking which basis each paper names.
A fifth cause is a file handed over in pieces: the record sits with one party and the papers with others. Without the whole file, the mass cannot be read against the papers, and the file cannot show who to ask. Keep the agreement, the record and the papers together, and hand the file over whole.
What this container VGM checklist leaves for the carrier and the terminal to decide
This checklist cannot decide whether a container may be loaded: the carrier and the terminal decide that from the weighed mass and the papers.
It also cannot replace carrier or terminal advice on a specific container. Where a request names a step this checklist does not cover, ask the carrier or the terminal in writing.
It also cannot say whether the cargo inside the container matches the count on the packing list: that rests with the packing list check, and with the load as it stands.
Export guides on this site
- VGM for Ocean Freight: Verified Gross Mass and Shipper Responsibilities
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
- Bill of Lading Checklist: Parties, Freight Terms, Clean Bill & Originals
- Packing List Checklist: 30 Checks Before the Packing List Is Issued
- Bill of Lading and Packing List Consistency Checklist: 30 Cross-Checks Before Issue
- Container Seal & Container Condition Checklist: 30 Checks Before Handover
Related guides
- Oversized and Overweight Cargo Checklist: 30 Checks Before the Cargo Is Booked
- VGM for Ocean Freight: Verified Gross Mass and Shipper Responsibilities
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
- Bill of Lading Checklist: Parties, Freight Terms, Clean Bill & Originals
- Packing List Checklist: 30 Checks Before the Packing List Is Issued
- Bill of Lading and Packing List Consistency Checklist: 30 Cross-Checks Before Issue
- Container Seal & Container Condition Checklist: 30 Checks Before Handover
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
- IATA: Cargo
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What if the two weighing methods give different readings for the same container?
Weigh the container again by the method agreed with the carrier, and keep both readings on the file. Do not pick the lower reading or change the record to match the other method: ask the carrier in writing which reading stands, and write the answer down beside the record.
What if the container is found overweight after packing?
Write the finding down, weigh the container again, and ask the carrier in writing what to do next. Do not change the figure on the record. Where the load is changed, weigh the container again and write a fresh record, then read the fresh record against the bill of lading and the packing list.
What if the bill of lading and the packing list use different weight bases?
Ask the party who issued each paper in writing which weight basis it names, and keep both answers on the file. Do not change either paper to match the other: the bill of lading and the packing list each name the basis they were issued on, and the weighed mass on the record is read against each one in turn.