Sourcing Inspection Sampling Rate and Sampling Follow-Up Guide: From the Sampling Rate to the Sampling Record

A lot needs a sampling rate before the draw starts. This guide walks through that rate: set the sampling rate by lot, split the lot for the draw, read the sampling result, follow the result to its decision, and close the sampling record once the follow-up stands.
How to use this guide
This guide covers sampling rate and sampling follow-up only: setting the sampling rate by lot, splitting the lot for the draw, reading the sampling result, following the result to its decision, and closing the sampling record once the follow-up stands. It does not repeat the sourcing inspection sampling guide, which walks through the sampling plan, the draw at arrival and the inspection report, or the sourcing pre-shipment final inspection follow-up guide, which walks through the inspection request, the inspector arrival and the release decision or the rework decision that the sampling rate is read beside, or the sourcing failed inspection corrective action and re-inspection follow-up guide, which walks through the corrective-action notice and the re-inspection that follow a failed inspection, or the sourcing inspection report filing and traceability follow-up guide, which walks through the report number and the report version, the photo evidence and the video evidence, and the finding trace that the sampling record rests on.
Work through the five stages in order, and do not draw from the lot before the sampling rate stands. A draw made before the sampling rate stands may answer for a lot the order never names. The order, the inspection report, the sampling record, the sealed sample and the specification are the only records the buyer and the supplier read.
Each stage keeps its own record: note the sampling rate, the lot it names, and the sampling result and the sampling record drawn from it. A stage with no record is a stage the sampling rate cannot answer for.
Stage 1 — Setting the sampling rate by lot
Set the sampling rate by lot: read the lot against the order it answers for, read the lot against the specification the order names, and set the rate in the band the lot reads in. Set the three together, so the buyer and the supplier read the same sampling rate.
Where the lot reads in the low band, set the rate in the low band, and note the band beside the sampling rate, so the rate reads with the lot it names. Where the lot reads in the high band, set the rate in the high band, and note the band beside the sampling record. As an example only, a lot of 100 cartons with 10 cartons drawn reads in the middle band, and the example names no rate for any other lot.
Stage 2 — Splitting the lot for the draw
Split the lot for the draw: split the lot by carton row, draw from each row in turn, and note each row beside the sampling record. Split the three together, so the buyer and the supplier read the same draw.
Where the lot stands in one row only, draw from that row, and note the row beside the sampling rate. Where a carton row reads behind the sampling record, note the row beside the lot, and keep the draw from each row apart from the draw from another row.
Stage 3 — Reading the sampling result
Read the sampling result: read the drawn cartons against the order they answer for, read the drawn cartons against the specification the order names, and note what the draw shows beside the sampling record. Read the three together, so the buyer and the supplier read the same sampling result.
Where a drawn carton reads differently from the order, note the difference beside the sampling record, and ask the supplier in writing to settle it before the follow-up is closed. Where the drawn cartons read with the order, note the reading beside the sampling rate before the follow-up is closed.
Stage 4 — Following the sampling result to its decision
Follow the sampling result to its decision: read the result against the sampling rate it stands on, read the result against the lot it names, and note the decision beside the sampling record. Follow the three together, so the buyer and the supplier read the same follow-up.
Where the supplier and the buyer read a result differently, name the result, and ask the supplier in writing to settle it before the decision stands. Where a result stands open with no sampling record beside it, note it beside the sampling rate, and keep the sampling follow-up open until the result stands.
Stage 5 — Closing the sampling record once the follow-up stands
Close the sampling record once the follow-up stands: note the close beside the sampling rate it stands on, note the drawn cartons beside the lot and the supplier, and tell the supplier in writing that the sampling follow-up stands closed. A follow-up closed against the sampling rate reads the lot as it stands, not as first named.
Where the follow-up stands closed, note it beside the order, with the sampling rate and the sampling record, and tell the supplier in writing that the sampling record stands closed. Where a sampling result still stands open, ask for it in writing before the record is closed. Where the sampling record carries a lot the inspection report never names, note the lot beside the sampling rate before the record is closed.
Reading the sampling rate, the lot, the draw, the sampling result and the sampling record as one line from the sampling rate to the sampling record
A sampling rate is different from a draw with no rate beside it: the rate travels with the lot, and the lot is read through the rate it carries. The sampling rate names where the follow-up starts, the lot names what the rate answers for, the draw names what the rate is set for, the sampling result names what the draw shows, and the sampling record names where the follow-up ends, and the five are read together, not one by one, with the supplier beside the buyer at each reading.
The sampling rate is set from the lot because a rate is not one rate repeated: the rate the lot reads in, the rate the buyer confirms beside the sealed sample, and the last rate the closed sampling record answers for before the follow-up stands. The rate names the order, the lot and the draw behind it.
The lot is read against the sampling rate, not instead of it: the lot the rate names, the cartons the lot carries, and the order the lot reads beside the inspection report. A lot that names no rate reads as a reply, not as a check, and a reply does not answer the goods. The lot is the lot the rate rests on.
A single drawn carton with no sampling record reads as a single carton; the same unrecorded carton at each reading reads as a pattern, and a pattern asks a different question: what stands behind the goods on the order. The reader notes the pattern on the sampling record and names the cartons that carry it, so the buyer does not treat a pattern as single cartons.
The sampling result is read beside the sampling record, not instead of it: the result as it stands, the record as it stands, and the lot as it stands beside the result. A result read that names only the supplier note reads only the supplier note, and the goods go unread.
The sampling record is the line beside the inspection report, and it is read once: the record the rate names, the lot the record answers for, and the supplier the record rests on. The record is read against the specification the order first confirmed, and a record read twice is settled once, in writing, before the follow-up is closed, and the settlement stands on the sampling rate.
The sampling rate, the lot, the draw, the sampling result and the sampling record are read together. The rate ties each order to where the follow-up starts, the lot ties the order to the goods each rate carries, the draw ties the rate to the cartons each lot carries, the sampling result ties the draw to the goods that stand, and the sampling record ties the follow-up back to the rate set and closed. Where any link in that line is missing, it is settled with the supplier in writing before the follow-up is closed. The record the close leaves behind names the rate, the lot and the draw together. All five read together.
Which sampling rate difference to settle first when the drawn cartons and the order do not match
A sampling rate difference is settled against the specification; the sampling follow-up is closed only when the supplier and the buyer read the same rate.
| Difference found | When it applies | What to do first |
|---|---|---|
| The sampling rate carries no lot beside the rate | The rate reads with no lot to answer for | Name the lot beside the sampling rate before the draw stands |
| A carton row reads behind the sampling record | The draw reads behind the sampling rate it stands on | Read the lot, the sampling record and the specification together before the result is followed up |
| The supplier and the buyer read a result differently | The result stands with no shared reading behind it | Name the result, and ask the supplier in writing to settle it before the decision stands |
| A sampling result stands open with no sampling record beside it | The result leaves the follow-up neither followed up nor closed | Ask the supplier in writing which sampling record the result answers for before the follow-up is closed |
| A sampling record stands with no sampling result beside it | The record leaves the rate with no result to answer for | Follow the result to its decision beside the sampling record before the follow-up is closed |
Why a sampling rate is held back before the lot is split for the draw
Most holds come back to a few causes. A sampling rate is set with no lot named, so the rate reads with no lot to answer for. A lot is split with no sampling record named, so the draw reads only the draw. A result is read only at the close, so it reads only the close, not the goods.
The fix is the same in each case: name the lot, name the sampling rate, and put the answer on the sampling record before the follow-up is closed.
Next is a supplier that names no sampling record for a lot the inspection report names, then a draw that reads only the cartons at the front, and then a closed sampling record settled before the result stands.
What this sourcing inspection sampling rate and sampling follow-up guide leaves open for the buyer and the supplier
This guide cannot decide whether a supplier will close a sampling follow-up the result holds open: the supplier decides, and the buyer confirms it in writing with the supplier.
It also cannot replace buyer or supplier advice on a specific order. Where a supplier names a step this guide does not cover, ask the supplier.
It also cannot say whether the goods the draw never touched match the order: that rests with the goods it names.
Sourcing and consolidation guides on this site
- Sourcing Inspection Sampling Guide: From the First Carton Draw to the Inspection Report
- Sourcing Pre-Shipment Final Inspection Follow-Up Guide: From the Inspection Request to the Shipment Handover
- Sourcing Inspection Report Filing and Traceability Follow-Up Guide: From the Filed Report to the Traced Finding
- Sourcing Failed Inspection Corrective Action and Re-Inspection Follow-Up Guide: From the Corrective-Action Notice to the Release-or-Return Decision
- Shenzhen Electronics Sourcing and Pre-Shipment QC Guide: From Selection to the Consolidated Load
- Sourcing Mass Production Follow-Up Guide: From Mass Production Released to Production Closed
Related guides
- Sourcing Inspection Sampling Guide: From the First Carton Draw to the Inspection Report
- Sourcing Pre-Shipment Final Inspection Follow-Up Guide: From the Inspection Request to the Shipment Handover
- Sourcing Inspection Report Filing and Traceability Follow-Up Guide: From the Filed Report to the Traced Finding
- Sourcing Failed Inspection Corrective Action and Re-Inspection Follow-Up Guide: From the Corrective-Action Notice to the Release-or-Return Decision
- Shenzhen Electronics Sourcing and Pre-Shipment QC Guide: From Selection to the Consolidated Load
- Sourcing Mass Production Follow-Up Guide: From Mass Production Released to Production Closed
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
- IATA: Cargo
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What should be set first when a lot arrives for sampling?
Set the sampling rate first: read the lot against the order it answers for and the specification the order names, set the rate in the band the lot reads in, and note the band beside the sampling rate, so the buyer and the supplier read the same rate.
How should the lot be split for the draw?
Split the lot by carton row: draw from each row in turn and note each row beside the sampling record — and where a carton row reads behind the sampling record, note the row beside the lot before the draw stands.
What should be done when a sampling result is still open at the close of the sampling follow-up?
Name the result that stands open, read it against the sampling rate and the lot, and ask the supplier in writing for it, so the follow-up reads the lot as it stands.