Sourcing Inspection Report Filing and Traceability Follow-Up Guide: From the Filed Report to the Traced Finding

A filed report answers for the goods it names. This guide walks through that filing: number and version each report, file its photo and video evidence, trace each finding to its batch and supplier, follow the corrective action to its re-inspection, and close the line once the re-inspection stands.
How to use this guide
This guide covers inspection report filing and traceability follow-up only: numbering and versioning each inspection report, filing the photo evidence and the video evidence beside it, tracing each finding back to the batch and the supplier it names, following the corrective action to its re-inspection, and closing the report line once the re-inspection stands. It does not repeat the sourcing pre-shipment final inspection follow-up guide, which walks through the inspection request, the inspector arrival and the release or rework decision that lead into the report, or the sourcing failed inspection corrective action and re-inspection follow-up guide, which walks through the corrective-action notice and the re-inspection that follow a failed inspection, or the sourcing on-site inspection supplier coordination follow-up guide, which walks through the inspection preparation and the signed inspection record that the report is filed against.
Work through the five stages in order, and do not close the report line before each finding behind it is traced. A line closed before the findings are traced may answer a finding the order never names. The order, the inspection report, the sealed sample and the specification are the only records the buyer and the supplier read.
Each stage keeps its own record: note the report number, the report version, and the photo evidence and the video evidence beside the report. A stage with no record is a stage the filed report cannot answer for.
Stage 1 — Giving each inspection report its number and version
Give each inspection report its number and version: the report number the report is filed under, the report version the filing reads, and the order the number and the version answer for. Give the three together, so the buyer and the supplier read the same report.
Where the supplier names a report with no number beside it, ask in writing for the report number, so the filing rests on a report the supplier can answer for. Where a report carries a version the order never names, note the version beside the number, and read the report against the specification before the finding is traced.
Stage 2 — Filing the photo evidence and the video evidence beside the report
File the photo evidence and the video evidence beside the inspection report: the photo evidence the finding rests on, the video evidence the photo evidence cannot answer for, and the sealed sample beside the report. File the three together, so the buyer and the supplier read the same evidence.
Where the photo evidence names a carton the report never names, note the carton beside the photo evidence, and ask the supplier in writing to name it before the finding is traced. Where the video evidence reads behind the photo evidence, note it beside the finding, and keep the photo evidence apart from the video evidence.
Stage 3 — Tracing each inspection finding back to the batch and the supplier
Trace each inspection finding back to the batch and the supplier: the batch the finding names, the supplier the batch answers for, and the order the supplier reads beside the report. Trace the three together, so the filed report reads the finding as it stands, not as first named.
Where a finding names a batch the order never names, note the batch beside the finding, and ask the supplier in writing whether the batch answers the order. Where the finding names a supplier the report never names, name the supplier, and read the finding against the specification before the corrective action is followed.
Stage 4 — Following the corrective action to its re-inspection
Follow each corrective action to its re-inspection: read the corrective action against the finding it answers for, the re-inspection against the corrective action, and the re-inspection result against the report version it stands on. A corrective action followed to its re-inspection reads the finding as it stands, not as first named.
Where the supplier and the buyer read a corrective action differently, name the corrective action, and ask the supplier in writing to settle it before the re-inspection is filed. Where a corrective action stands open with no re-inspection beside it, note it beside the report, and keep the report line open until the re-inspection stands.
Stage 5 — Closing the report line once the re-inspection stands
Close the report line once the re-inspection stands: file the re-inspection beside the version it stands on, note the closed finding beside the batch and the supplier, and tell the supplier in writing that the report line stands closed. A line closed against the filed report reads the goods as they stand, not as first named.
Where the re-inspection stands, note it beside the order, with the report number and the report version, and tell the supplier in writing that the finding stands closed. Where a finding still stands open, ask for the re-inspection in writing before the line is closed. Where the report carries a version the re-inspection never names, note the version beside the report number before the line is closed.
Reading the report number, the report version, the photo evidence, the video evidence, the finding trace and the corrective-action closure as one line from the filed report to the traced finding
An inspection report is different from a report with no filing beside it: the filing travels with the order, and the order is read through the report it carries. The report number names where the filing starts, the report version names what the filing reads, the photo evidence names what the finding rests on, the video evidence names what the photo evidence cannot answer for, the finding trace names who answers for the batch, and the closure names where the line ends, and the six are read together, not one by one.
The report number is set from the order because a number is not one number repeated: the number the filing reads, the number the buyer confirms beside the sealed sample, and the last number the closed report line answers for before the goods move. The number names the order, the report and the evidence behind it.
The report version is read against the report number, not instead of it: the version the number names, the finding the version carries, and the goods the version reads beside the inspection report. A version that names no number reads as a reply, not as a check, and a reply does not answer the goods. The filed report is the record the version rests on.
A single inspection finding with no trace reads as a single finding; the same untraced finding at each reading reads as a pattern, and a pattern asks a different question: what stands behind the goods on the order. The reader notes the pattern on the filed report and names the findings that carry it, so the buyer does not treat a pattern as single findings.
The photo evidence is read beside the video evidence, not instead of it: the photo as it stands, the video as it stands, and the finding as it stands beside the photo. A photo read that names only the supplier note reads only the supplier note, and the goods go unread.
The finding trace is the line beside the inspection report, and it is read once: the finding the trace names, the batch the trace answers for, and the supplier the trace rests on. The trace is read against the specification the order first confirmed, and a trace read twice is settled once, in writing, before the goods move, and the settlement stands on the filed report.
The report number, the report version, the photo evidence, the video evidence, the finding trace and the corrective-action closure are read together. The number ties each order to where the filing starts, the version ties the order to the finding each number carries, the photo evidence ties the finding to the goods, the video evidence ties the photo to the goods the photo cannot answer for, the finding trace ties the goods to the batch and the supplier, and the closure ties the line back to the report filed and closed. Where any link in that line is missing, it is settled with the supplier in writing before the goods move. The record the closure leaves behind names the number, the version and the trace together.
Which report difference to settle first when the filed report and the supplier note disagree
A report difference is settled against the specification; the report line is closed only when the supplier and the buyer read the same finding.
| Difference found | When it applies | What to do first |
|---|---|---|
| The filed report carries no report number beside the finding | The finding reads with no number to answer for | Give the report its number beside the finding before the finding is traced |
| A photo shows a carton the report never names | The photo evidence reads behind the report version it stands on | Read the photo evidence, the video evidence and the version together before the finding is traced |
| The supplier and the buyer read a finding differently | The finding stands with no shared reading behind it | Name the finding, and ask the supplier in writing to settle it before the line is closed |
| A finding stands open with no re-inspection beside it | The report leaves the finding neither traced nor closed | Ask the supplier in writing which corrective action the finding answers for before the line is closed |
| A report version stands with no photo evidence beside it | The version leaves the finding with no evidence to answer for | File the photo evidence beside the report version before the finding is traced |
Why inspection report filing is held back before the findings are traced
Most holds come back to a few causes. A report is filed with no report number, so the filing reads it with no number to answer for. A finding is traced with no batch named, so the finding reads only the finding. A corrective action is read only at the re-inspection, so it reads only the re-inspection, not the goods.
The fix is the same in each case: name the report number, name the batch, and put the answer on the filed report before the line is closed.
Next is a supplier that names no photo evidence for a finding the report names, then a video that reads only the cartons at the front, and then a closed report line settled before the findings are traced.
What this sourcing inspection report filing and traceability follow-up guide leaves open for the buyer and the supplier
This guide cannot decide whether a supplier will close a report line the findings hold open: the supplier decides, and the buyer confirms it in writing with the supplier.
It also cannot replace buyer or supplier advice on a specific order. Where a supplier names a step this guide does not cover, ask the supplier.
It also cannot say whether the goods the report never touched match the order: that rests with the goods it names.
Sourcing and consolidation guides on this site
- Sourcing Pre-Shipment Final Inspection Follow-Up Guide: From the Inspection Request to the Shipment Handover
- Sourcing Failed Inspection Corrective Action and Re-Inspection Follow-Up Guide: From the Corrective-Action Notice to the Release-or-Return Decision
- Sourcing On-Site Inspection Supplier Coordination Follow-Up Guide: From Inspection Preparation to the Signed Inspection Record
- Sourcing Inspection Sampling Guide: From the First Carton Draw to the Inspection Report
- Shenzhen Electronics Sourcing and Pre-Shipment QC Guide: From Selection to the Consolidated Load
- Sourcing Mass Production Follow-Up Guide: From Mass Production Released to Production Closed
Related guides
- Sourcing Final Payment and Documents Filing Follow-Up Guide: From the Final Payment Settled to the Full Filing Set Read
- Sourcing Inventory Discrepancy and Cycle Count Follow-Up Guide: From the Discrepancy Classification to the Count Record
- Sourcing Arrival Inventory Check Follow-Up Guide: From the Inventory Count to the Inventory Record
- Sourcing Arrival Acceptance Exception Claim Exchange Follow-Up Guide: From the Evidence Pack to the Claim Closure
- Sourcing Inspection Sampling Rate and Sampling Follow-Up Guide: From the Sampling Rate to the Sampling Record
- Sourcing Inspection Pass Release and Shipment Follow-Up Guide: From the Release Confirmation to the Shipment Handover
- Sourcing Pre-Shipment Final Inspection Follow-Up Guide: From the Inspection Request to the Shipment Handover
- Sourcing Failed Inspection Corrective Action and Re-Inspection Follow-Up Guide: From the Corrective-Action Notice to the Release-or-Return Decision
- Sourcing On-Site Inspection Supplier Coordination Follow-Up Guide: From Inspection Preparation to the Signed Inspection Record
- Sourcing Inspection Sampling Guide: From the First Carton Draw to the Inspection Report
- Shenzhen Electronics Sourcing and Pre-Shipment QC Guide: From Selection to the Consolidated Load
- Sourcing Mass Production Follow-Up Guide: From Mass Production Released to Production Closed
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
- IATA: Cargo
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What should be filed first when an inspection report arrives?
File the report number and the report version first: the number the report is filed under, the version the filing reads, and the order the number and the version answer for, so the buyer and the supplier read the same report.
How should the photo evidence and the video evidence be filed beside the report?
File the photo evidence and the video evidence beside the inspection report: read the photo evidence against the finding it names and the video evidence against the photo evidence — and where the video evidence reads behind the photo evidence, note it beside the filed report.
What should be done when a finding is still open at the close of the report line?
Name the finding that stands open, trace it to its batch and supplier, and follow the corrective action to its re-inspection, so the report reads the goods as they stand.