ANELGO GLOBAL LOGISTICS
Shipping guides / Guides · Sourcing on-site inspection supplier coordination follow-up guide

Sourcing On-Site Inspection Supplier Coordination Follow-Up Guide: From Inspection Preparation to the Signed Inspection Record

Guides · Sourcing on-site inspection supplier coordination follow-up guide · Reviewed November 22, 2026 · 10 minute read

A quiet inspection table with plain unmarked cartons, a blank ruled inspection sheet and a pen beside a plain sealed sample box, in muted blue-grey tones
Illustrative AI-generated image.

An on-site inspection is only as clear as the supplier coordination behind it. This guide walks through that coordination: prepare the inspection table and the samples, accompany the inspector and record each finding, confirm each finding on the spot, sign the inspection record, and seal the drawn samples.

How to use this guide

This guide covers supplier coordination at an on-site inspection only: preparing the inspection table and the samples, accompanying the inspector and recording each finding as it is read, confirming each finding on the spot and signing the inspection record, sealing the drawn samples, and closing the inspection line once the record is signed. It does not repeat the sourcing pre-shipment final inspection follow-up guide, which walks through the inspection request, the inspector arrival and the release or rework decision that lead into the on-site inspection, or the sourcing failed inspection corrective action and re-inspection follow-up guide, which walks through the corrective-action notice and the re-inspection that follow a failed inspection, or the sourcing inspection sampling guide, which draws a sample at arrival.

Work through the five stages in order, and do not sign the inspection record before each finding behind it is confirmed on the spot. A record signed before the findings are confirmed may answer a finding the order never names. The order, the inspection sheet, the sealed sample and the specification are the only records the buyer and the supplier read.

Each stage keeps its own record: note the inspection preparation, the samples beside the inspection table, and the sealed sample beside the inspection sheet. A stage with no record is a stage the signed inspection record cannot answer for.

Stage 1 — Preparing the inspection table and the samples for the inspector arrival

Prepare the inspection table and the samples for the inspector arrival: the inspection table the inspector reads from, the samples the inspector reads against the specification, and the sealed sample beside the inspection sheet. Prepare the table, the samples and the sealed sample together, so the inspector and the supplier read the same goods.

Note the inspection preparation beside the order, with the inspection sheet, the samples, and the sealed sample beside the sheet. Where the supplier names a sample with no sealed sample beside it, ask in writing for the sealed sample, so the preparation rests on a sample the supplier can answer for.

Stage 2 — Accompanying the inspector and reading each inspection finding as it stands

Accompany the inspector through the on-site inspection and read each inspection finding as it stands: the carton the inspector opens, the sample the inspector draws, and the finding the drawn sample carries. Accompany the inspector, the carton and the sample together, so the buyer and the supplier read the same inspection.

Where the inspector opens a carton the supplier never named, note the carton beside the inspection sheet, and ask the supplier in writing to name it before the finding is recorded. Where a drawn sample reads behind the sealed sample, note the sample beside the finding, and keep the drawn samples apart from the sealed sample.

Stage 3 — Recording each inspection finding on the inspection sheet as it is read

Record each inspection finding on the inspection sheet as it is read: the finding the inspector names, the carton the finding names, and the sample the finding rests on. Record the finding, the carton and the sample together, so the inspection sheet reads the inspection as it stands, not as first named.

Where a finding names a carton the order never names, note the carton beside the finding, and ask the supplier in writing whether the carton answers the order. Where the inspection sheet carries a finding with no carton beside it, name the carton, and read the finding against the specification before the record is signed.

Stage 4 — Confirming each finding on the spot and signing the inspection record

Confirm each finding on the spot and sign the inspection record: read the inspection finding against the inspection sheet, the signature against the finding, and the record against the order. A finding confirmed on the spot reads the goods as they stand, not as first named.

Where the supplier and the buyer read a finding differently, name the finding, and ask the supplier in writing to settle it before the record is signed. Where a finding stands open with no sign-off beside it, note the finding beside the inspection sheet, and keep the record open until the finding is confirmed.

Stage 5 — Sealing the drawn samples and closing the inspection line once the record is signed

Seal the drawn samples and close the inspection line once the record is signed: seal each drawn sample beside the inspection sheet, restore each opened carton beside the sealed sample, and note the sealed samples beside the order. A line closed against the signed record reads the goods as they stand, not as first named.

Where the record is signed, note the signature beside the order, with the inspection sheet and the sealed samples, and tell the supplier in writing that the inspection line stands closed. Where a drawn sample stands unsealed, name the sample, and seal it before the goods move. Where a finding still stands open, ask for the confirmation in writing before the goods move.

Reading the inspection preparation, the sample provision, the accompaniment, the on-the-spot confirmation and the sample sealing as one line from the inspector arrival to the signed inspection record

An on-site inspection is different from an inspection with no supplier beside it: the supplier coordination travels with the order, and the order is read through the inspection it carries. The inspection preparation names where the coordination starts, the sample provision names what the inspector reads, the accompaniment names who walks beside the inspector, the on-the-spot confirmation names what the finding rests on, and the sample sealing names where the drawn samples go, and the five are read together, not one by one.

The inspection preparation is set from the order because a preparation is not one preparation repeated: the preparation the inspector arrival finds, the preparation the buyer confirms beside the sealed sample, and the last preparation the signed inspection record answers for before the goods move. The preparation names the order, the inspection table, the samples and the inspection sheet behind it.

The sample provision is read against the inspection preparation, not instead of it: the samples the preparation names, the sealed sample the samples are read against, and the goods the samples read beside the inspection sheet. A sample provision that names no sealed sample reads as a reply, not as a check, and a reply does not answer the goods. The inspection record is the record the provision rests on.

A single inspection finding with no record reads as a single finding; the same unconfirmed finding at each reading reads as a pattern, and a pattern asks a different question: what stands behind the goods on the order. The reader notes the pattern on the inspection record and names the findings that carry it, so the buyer does not treat a pattern as a run of single findings.

The sealed sample is read beside the drawn samples, not instead of them: the sample as it stands, the carton as it stands, and the finding as it stands beside the sample. A sealed sample read that names only the supplier note reads only the supplier note, and the goods go unread.

The on-the-spot confirmation is the sign-off beside the inspection sheet, and it is read once: the finding the confirmation names, the specification the confirmation answers for, and the goods the confirmation rests on. The confirmation is read against the specification the order first confirmed, and a confirmation read twice is settled once, in writing, before the goods move, and the settlement stands on the inspection record.

The inspection preparation, the sample provision, the accompaniment, the on-the-spot confirmation and the sample sealing are read together. The preparation ties each order to where the coordination starts, the sample provision ties the order to the goods each preparation carries, the accompaniment ties the goods to the inspector, the on-the-spot confirmation ties the finding to the signed inspection record, and the sample sealing ties the line back to the goods sealed and closed. Where any link in that line is missing, it is settled with the supplier in writing before the goods move. The record the confirmation leaves behind names the preparation, the confirmation and the signature together.

Which on-site difference to settle first when the inspection record and the supplier note disagree

An on-site difference is settled against the specification; the inspection record is signed only when the supplier and the buyer read the same finding.

Difference foundWhen it appliesWhat to do first
The inspection table carries no inspection sheet beside the samplesThe inspector reads the samples with no sheet to answer forPrepare the inspection sheet beside the samples before the inspector reads the first carton
A drawn sample reads behind the sealed sampleThe finding reads behind the sample the order first confirmedRead the drawn sample, the sealed sample and the specification together before the finding is recorded
The supplier and the buyer read a finding differentlyThe finding stands with no shared reading behind itName the finding, and ask the supplier in writing to settle it before the record is signed
A finding stands open with no signature beside itThe record leaves the finding neither confirmed nor signedAsk the supplier in writing which confirmation the finding answers for before the record is signed
A drawn sample stands unsealed at the close of the inspectionThe sample leaves the inspection with no seal to answer forSeal the drawn sample beside the inspection sheet before the goods move

Why supplier coordination at inspection is held back before the findings are signed

Most holds come back to a few causes. An inspection table is prepared with no inspection sheet, so the inspector reads it with no sheet to answer for. A finding is recorded with no carton named, so the finding reads only the finding. A confirmation is read only at the signature, so it reads only the signature, not the goods.

The fix is the same in each case: name the inspection sheet, name the carton, and put the answer on the inspection record before the goods move.

Next is a supplier that names no sealed sample for a sample the inspection preparation names, then a drawn sample that reads only the cartons at the front of the load, and then a signed inspection record settled before the findings are confirmed.

What this sourcing on-site inspection supplier coordination follow-up guide leaves open for the buyer and the supplier

This guide cannot decide whether a supplier will sign an inspection record the findings hold open: the supplier decides, and the buyer confirms it in writing with the supplier.

It also cannot replace buyer or supplier advice on a specific order. Where a supplier names a step this guide does not cover, ask the supplier.

It also cannot say whether the goods the inspection never touched match the order: that rests with the goods the inspection names.

Sourcing and consolidation guides on this site

Related guides

Official references

Note: This guide provides general logistics planning information. It is not legal, customs, tax, safety or carrier acceptance advice. Requirements, services and schedules depend on the actual goods, route, contract, provider and current rules. Verify shipment-specific questions with the responsible carrier, customs broker or authority before dispatch.

For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.

Request a shipment review ↗

Frequently asked questions

What should be prepared first before the inspector arrives at an on-site inspection?

Prepare the inspection table and the samples first: the inspection table the inspector reads from, the samples the inspector reads against the specification, and the sealed sample beside the inspection sheet, so the inspector and the supplier read the same goods.

How should each inspection finding be recorded during the inspection?

Record each inspection finding on the inspection sheet as it is read: read the finding against the carton it names and the sample it rests on — and where the finding on a drawn sample reads behind the sealed sample, note the sample beside the inspection record.

What should be done when a finding is still open at the close of the inspection?

Name the finding that stands open, confirm it on the spot with the supplier — and confirm the sign-off again for the findings the inspection record clears, so the record reads the goods as they stand, not as first named.

← More shipping guides