Cold Chain Temperature-Controlled Cargo Checklist: 30 Checks From Booking to Delivery

Temperature-controlled cargo stays sellable only while the cold chain holds. A reefer booking, a pre-cooled container and a steady temperature record each guard one part of the trip, and a break at any point reaches the goods. Work through the four stages below, from booking to delivery.
How to use this checklist
This page covers the cold chain itself: the reefer booking and pre-cooling, the temperature record and monitoring, loading without a break in the chain, and the checks at arrival before the goods are taken. It does not repeat the ocean freight booking checklist, or the air freight booking checklist, which settles the booking, or the refrigerated shipping quote checklist, which gathers the data for a quote.
Work through the four stages in order, with the booking confirmation, the temperature record and the carrier's handling rules open on the desk. Read each temperature reading against the range the booking names, and note where a reading has no match on the papers. Do not answer from memory: ask the carrier in writing which setting stands, and keep the answer with the file.
The booking is made by the shipper, and the goods are taken by the receiver, so a question answered to the shipper and a question answered to the carrier are not the same answer. Read the temperature record while the goods are still on the water, and check it against the booking.
Stage 1 — Booking and the reefer setpoint
Stage 1 covers the booking: whether the cargo is booked as temperature-controlled, whether the reefer and its power match the cargo, and whether the setpoint is agreed in writing. A booking that reads as ordinary cargo is the difference found most often.
Read the booking beside the cargo description, and ask whether the temperature range it names is the range the cargo needs. Where the booking names no range, ask the carrier in writing which setting stands.
Stage 2 — Pre-cooling and the temperature record
Stage 2 covers the record: the pre-cooled container, the readings taken before loading, and the loggers that follow the cargo. A record that starts after loading is the gap found most often.
Read the record beside the booking, and ask whether each reading sits inside the range the booking names. Where a reading sits outside the range, ask the carrier in writing before the cargo is loaded.
Stage 3 — Loading without breaking the cold chain
Stage 3 covers the loading: the cargo moved into a pre-cooled container without a break in the chain, and the checks that the airflow stays open. Cargo left waiting in warm air is the loose end found most often.
Read the loading plan beside the container, and ask whether the cargo moves straight from cool storage into the container. Where the cargo must wait, ask the carrier in writing where it waits and how it stays cool.
Stage 4 — Arrival, pickup and temperature checks
Stage 4 covers the destination end: the carrier's checks before the goods are taken, and the readings the receiver must see. Goods taken before the temperature is checked are the loose end found most often.
Read the arrival readings beside the booking, and ask whether the last reading sits inside the range the booking names. Where the reading sits outside the range, ask the carrier in writing before the goods are taken.
Reading the temperature record as one line from loading to delivery
No other page on this site reads the temperature record as one line, and that is what this section does. A record is not a set of separate readings: it is a single line that runs from the pre-cooled container at loading, through every reading on the trip, to the last reading at arrival. Read it end to end, not reading by reading in isolation. The first reading is taken before the cargo is loaded, because the container must already be cool. Each later reading must sit inside the range the booking names: where one reading sits outside the range, the line breaks, and a broken line is a cargo the receiver may refuse. A gap where no reading was taken — the unit unplugged at transshipment, the logger moved, the record left open — breaks the line just as surely as a reading outside the range.
What the record does not say matters as much as what it says. It does not say the goods themselves stayed inside the range: a reading taken at the supply air vent and a reading taken at the return air vent can read differently, and neither one reads the core of the cargo. It does not say the cargo was loaded cool: a reefer holds a set temperature, it does not cool warm cargo down, so cargo loaded warm stays warm while the record reads steady. After delivery, read the delivery receipt against the last reading, and keep the record with the file. Where the record shows a break, the file must show who was asked, what was answered, and when the answer came — a record with no answer attached is a line that ends in mid-air.
The record also has to match the cargo, not just the container. A reefer set for one kind of cargo does not suit another, and a record that reads steady for frozen goods says nothing about chilled goods loaded beside them. Where two kinds of cargo share one container, the record must show which reading belongs to which cargo, and the loading plan must show where each kind sits. A single reading for a mixed load is a line that covers two stories at once, and neither one can be read from it.
Which party to ask first when the temperature record shows a break
A setpoint that reads differently from the booking is settled with the carrier, a gap in the record with the agent at the transfer point, an excursion with the carrier and the receiver, an arrival reading outside the range with the receiver.
| Difference found | When it applies | What to do first |
|---|---|---|
| Setpoint on the unit reading differently from the booking | The reefer shows a setting that is not the setting the booking names | Ask the carrier in writing which setting stands, then ask the shipper |
| Gap in the temperature record at transshipment | No reading was taken while the unit moved between one leg and the next | Ask the agent at the transfer point in writing what happened, then ask the carrier |
| Logger showing an excursion during the trip | A reading sits outside the agreed range while the goods are on the move | Ask the carrier in writing what caused it, then ask the receiver |
| Arrival reading outside the agreed range | The last reading sits outside the range the booking names | Ask the carrier in writing before the goods are taken, then ask the receiver |
Why a temperature-controlled shipment loses its cold chain before delivery
Most breaks come back to the same few causes in the file. The booking and the cargo read differently: ordinary cargo booked where the cargo asks for a reefer, or a setpoint written down that no one confirmed with the carrier. The record itself is out of order: a reading missing at transshipment, a logger placed where the air never reaches, a first reading taken after the cargo was already loaded.
The fix is the same in each case: settle the booking first, read the record end to end against the booking before the goods move, and keep the file whole until the delivery is confirmed. Where a correction is made, make it on every copy of the record at the same time, and ask in writing where the right version is in question.
A second cause is cargo loaded warm: the cargo went into the container before it was cool, and the reefer held the air steady while the cargo stayed warm. A third is a transfer point with no power: the unit unplugged while it waited, and the gap in the record is where the chain broke. Read the record against the booking as it stands, not as it stood at booking, and ask the carrier in writing where a reading has moved.
A fourth cause is a handover with no record: the unit changed hands at the transfer point, and no one wrote down who held it or what the reading was when it changed hands. Without that note, a break found at arrival cannot be traced to the leg where it happened, and the file cannot show who to ask. Keep a handover note for every change of hands, with the reading at the time it changed hands, and keep it beside the temperature record.
What this cold chain checklist leaves for the carrier and the receiver to decide
This checklist cannot decide whether the goods will be taken: the receiver decides that, and the carrier decides when the goods move. It cannot say what the carrier will ask for next.
It also cannot replace carrier or receiver advice on a specific shipment. Where a request names a paper this checklist does not cover, or a reading in the record is disputed, ask the carrier or the receiver in writing. It cannot take goods the carrier has not agreed to release.
It also cannot say when the delivery will come through, or when the goods will move again: that rests with the carrier, and with the papers the delivery asks for. Where the delivery is still waiting, ask the carrier in writing what is still asked for, and keep the answer with the file.
Export guides on this site
- Refrigerated Shipping to Asia: Reefer Setpoint, Ventilation & Route Quote Data
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
- Air Freight Booking Checklist: Direct, Consolidated & Carrier Handover
- Dangerous Goods Sea Freight Checklist: IMDG Booking & Handover
- Dangerous Goods Air Freight Checklist: Documents, Packaging & Carrier Acceptance
- FBA Inbound Shipment Checklist: Prep, Packing & Carrier Handover
Related guides
- Oversized and Overweight Cargo Checklist: 30 Checks Before the Cargo Is Booked
- Refrigerated Shipping to Asia: Reefer Setpoint, Ventilation & Route Quote Data
- Ocean Freight Booking Checklist: FCL, LCL & Carrier Handover
- Air Freight Booking Checklist: Direct, Consolidated & Carrier Handover
- Dangerous Goods Sea Freight Checklist: IMDG Booking & Handover
- Dangerous Goods Air Freight Checklist: Documents, Packaging & Carrier Acceptance
- FBA Inbound Shipment Checklist: Prep, Packing & Carrier Handover
Official references
- US Customs and Border Protection: Trade
- ICC: Incoterms 2020
- FIATA: International Federation of Freight Forwarders Associations
- IATA: Cargo
For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.
Request a shipment review ↗Frequently asked questions
What should I check first when the reefer setpoint and the booking read differently?
Read the setpoint on the unit against the range the booking names, and ask the carrier in writing which setting stands. Do not load the cargo until the carrier confirms the setting in writing, and keep the answer beside the booking confirmation.
What if the temperature record has a gap during transshipment?
Ask the agent at the transfer point in writing what happened to the unit while it waited, and ask the carrier whether the record still holds. Do not take the goods until the carrier confirms the record in writing, and do not add a further reading to cover the gap.
What if the goods arrive outside the agreed temperature range?
Ask the carrier in writing what caused the reading, and ask the receiver in writing whether the goods will be taken. Do not take the goods on a copy of the record, and do not let the goods move until the carrier confirms the pickup in writing.