ANELGO GLOBAL LOGISTICS
Shipping guides / Guides · Multimodal transport checklist

Multimodal Transport Checklist: 30 Checks From Booking to Delivery

Guides · Multimodal transport checklist · Reviewed November 19, 2026 · 10 minute read

A container being lifted from a cargo ship to a truck at a container port, with rail lines in the foreground and stacked containers behind
Illustrative AI-generated image.

Combined transport moves one shipment on more than one kind of carrier, and the shipment is only as sound as the handover between legs. Each leg runs on its own papers, and a gap at any handover reaches the goods. Work through the stages below, from the combination to pickup.

How to use this checklist

This page covers the combination itself: choosing the legs, the papers and the responsibility handover between legs, the connections and transshipment, and the pickup at the destination. It does not repeat the ocean freight booking checklist or the air freight booking checklist, which settle a single-leg booking, or the pickup after customs clearance checklist, which covers pickup after clearance, or the bill of lading checklist.

Work through the four stages in order, with the booking confirmation and the through transport document open on the desk. Read each handover note against the papers for the leg that follows. Do not answer from memory: ask the forwarder in writing which paper stands, and keep the answer with the file.

The booking is made by the shipper, and the goods are taken by the receiver, so a question answered to the shipper and a question answered to the carrier are not the same answer. Read the handover chain while the goods are still moving, and check it against the booking.

Stage 1 — Choosing the combination

Stage 1 covers the combination: whether the legs fit the goods, whether each leg has a carrier, and whether one paper covers the whole trip. A combination chosen leg by leg, with no one paper covering the trip, is the difference found most often.

Read the combination beside the cargo description, and ask whether each leg can carry the goods as they are packed. Where a leg cannot, ask the forwarder in writing which leg stands in its place.

Stage 2 — Documents and responsibility at each handover

Stage 2 covers the papers: the through document where one covers the trip, the separate papers where it does not, and the handover notes that pass responsibility from one carrier to the next. A handover with no note is the gap found most often.

Read the papers beside the booking, and ask whether every leg is named on a paper the carrier will honour. Where a leg is named on no paper, ask the forwarder in writing.

Stage 3 — Connections and transshipment

Stage 3 covers the connections: the transfer from one leg to the next, the checks at each transfer point, and the record that follows the goods through every change of carrier. Goods left waiting at a transfer point with no record are the loose end found most often.

Read the transfer plan beside the papers, and ask whether the goods move straight from one carrier to the next. Where the goods must wait, ask the carrier in writing where they wait and who holds them.

Stage 4 — Arrival and pickup at the destination

Stage 4 covers the destination end: the carrier's checks before the goods are taken, and the papers the receiver must show. Goods taken before the papers are checked are the loose end found most often.

Read the arrival papers beside the through document, and ask whether the last leg matches the papers the receiver holds. Where a paper reads differently, ask the carrier in writing.

Reading the handover chain as one line from the first carrier to the last

No other page on this site reads the handover chain as one line, and that is what this section does. A multimodal trip is not a set of separate legs: it is a single chain from the first carrier who takes the goods, through every transfer point, to the last carrier who hands them over. The first handover is agreed before the goods move, because the paper that covers the whole trip must name every leg. Each later handover must match the paper: where one handover has no note, the chain breaks, and a broken chain is a shipment no carrier will answer for. A gap where no one wrote down who held the goods — the container moved from ship to rail with no signature, the truck collected with no note — breaks the chain just as surely as a handover that reads differently from the paper.

What the chain does not say matters as much as what it says. It does not say the goods themselves were checked at each transfer: a seal number noted at loading can match the number noted at arrival while the goods inside were never seen. It does not say the goods were handled as the papers ask: a through document names the legs, it does not watch the loading at each transfer point. Where the chain shows a break, the file must show who was asked and what was answered — a chain with no answer attached is a line that ends in mid-air.

The chain also has to match the goods, not just the carriers. A combination chosen for one kind of cargo does not suit another, and a chain that reads steady for boxed goods says nothing about goods that ask for handling of their own. Where two kinds of goods share one container, the chain must show which handover belongs to which goods. A single note for a mixed load is a chain that covers two stories at once, and neither one can be read from it. Read the handover chain against the booking as it stands, not as it stood at booking, and ask the forwarder in writing where a handover has moved.

Which leg to settle first when the handover papers disagree

A through document that reads differently from a leg paper is settled with the forwarder, a handover with no note with the carrier at the transfer point, a seal number that reads differently with the carrier who holds the goods, a pickup paper that reads differently with the receiver.

Difference foundWhen it appliesWhat to do first
Through document reading differently from a leg paperThe through document names a leg the leg paper does not coverAsk the forwarder in writing which paper stands, then ask the carrier
Handover with no note at a transfer pointNo one wrote down who held the goods when the carrier changedAsk the carrier at the transfer point in writing what happened, then ask the forwarder
Seal number reading differently at a transfer pointThe seal number on the file is not the number on the unitAsk the carrier who holds the goods in writing what changed, then ask the forwarder
Pickup paper reading differently from the through documentThe papers the receiver holds name a leg the through document does notAsk the carrier in writing before the goods are taken, then ask the receiver

Why a combined shipment stalls between one leg and the next

Most stalls come back to the same few causes in the file. The papers and the legs read differently: a leg booked where the goods ask for another kind of carrier, or a handover agreed but never written down. The papers are out of order: a leg named on no paper, a handover note missing at a transfer point, a seal number that reads differently from the file.

The fix is the same in each case: settle the combination first, read the handover chain end to end against the papers before the goods move, and keep the file whole until the delivery is confirmed. Where a correction is made, make it on every copy of the papers at the same time.

A second cause is a connection missed at a transfer point: the next carrier left before the goods arrived, and the goods waited with no one named to hold them. A third is a transfer point with no cover: the goods waited in the open while the next leg was arranged, and the gap in the record is where the chain broke.

A fourth cause is a handover with no record: the goods changed hands at the transfer point, and no one wrote down who held them or what the seal number was when they changed hands. Without that note, a stall found at arrival cannot be traced to the leg where it happened, and the file cannot show who to ask. Keep a handover note for every change of hands, with the seal number at the time, and keep it beside the through transport document.

What this multimodal checklist leaves for the carrier and the forwarder to decide

This checklist cannot decide whether the goods will be taken: the receiver decides that, and the carrier decides when the goods move. It cannot say what the carrier will ask for next.

It also cannot replace carrier or forwarder advice on a specific shipment. Where a request names a paper this checklist does not cover, or a handover in the chain is disputed, ask the carrier or the forwarder in writing. It cannot take goods the carrier has not agreed to release.

It also cannot say when the delivery will come through, or when the goods will move again: that rests with the carrier, and with the papers the delivery asks for. Where the delivery is still waiting, ask the carrier in writing what is still asked for.

Export guides on this site

Related guides

Official references

Note: This guide provides general logistics planning information. It is not legal, customs, tax, safety or carrier acceptance advice. Requirements, services and schedules depend on the actual goods, route, contract, provider and current rules. Verify shipment-specific questions with the responsible carrier, customs broker or authority before dispatch.

For a route-specific logistics review, provide the product, origin, destination, packed dimensions, weight and ready date.

Request a shipment review ↗

Frequently asked questions

What should I check first when the through document and a leg paper read differently?

Read the through document against the paper for the leg, and ask the forwarder in writing which paper stands. Do not let the goods move to the next leg until the forwarder confirms the paper in writing.

What if a handover at a transfer point has no note?

Ask the carrier at the transfer point in writing who held the goods and what the seal number was, and ask the forwarder whether the chain still holds. Do not take the goods until the carrier confirms the handover in writing, and do not add a further note to cover the gap.

What if the goods arrive with a seal number that reads differently from the file?

Ask the carrier in writing what changed the seal, and ask the receiver in writing whether the goods will be taken. Do not take the goods on a copy of the papers.

← More shipping guides